Three‐dimensionally printed bioinspired superhydrophobic PLA membrane for oil‐water separation
- 21 June 2018
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 64 (10) , 3700-3708
Abstract
A novel lotus‐leaf‐inspired superhydrophobic poly(lactic acid) (PLA) porous membrane was fabricated for oil‐water separation based on fused deposition modeling three‐dimensional printing and subsequent chemical etching and the decoration of polystyrene nanospheres. A superhydrophobic PLA fractal surface with a water contact angle of 151.7° and low water adhesion force of 21.8 μN was achieved. The membrane pore size could be easily adjusted from 40 to 600 μm via a computer‐aided design program to optimize separation performance. The maximal oil‐water separation efficiency of 99.4% was achieved with a pore size of 250 μm, which also exhibited a high flux of 60 kL m−2 h−1. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3700–3708, 2018Keywords
Funding Information
- National Natural Science Foundation of China (21621004, 21777112, 21476165)
This publication has 50 references indexed in Scilit:
- A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic SensorsPLOS ONE, 2012
- An in situ polymerization approach for the synthesis of superhydrophobic and superoleophilic nanofibrous membranes for oil–water separationNanoscale, 2012
- Stable superhydrophobic coatings from thiol-ligand nanocrystals and their application in oil/water separationJournal of Materials Chemistry, 2012
- Fractal structure can explain the increased hydrophobicity of nanoporous silicon filmsMicroelectronic Engineering, 2011
- Herding surfactants to contract and thicken oil spills in pack ice for in situ burningCold Regions Science and Technology, 2011
- One‐step fabrication of fluoropolymer transparent films with superhydrophobicity by dry methodJournal of Applied Polymer Science, 2010
- Bioinspired superhydrophobic poly(L‐lactic acid) surfaces control bone marrow derived cells adhesion and proliferationJournal of Biomedical Materials Research Part A, 2008
- Towards bioinspired superhydrophobic poly(L-lactic acid) surfaces using phase inversion-based methodsBioinspiration & Biomimetics, 2008
- Facile electrochemical route to directly fabricate hierarchical spherical cupreous microstructures: Toward superhydrophobic surfaceElectrochemistry Communications, 2008
- Optical Lithography with Printed Metal Mask and a Simple Superhydrophobic SurfaceSmall, 2008