Investigations on the re‐passivation of carbon steel in chloride containing concrete in consequence of cathodic polarisation
Authors:
- 9 February 2009
- journal article
- research article
- Published by Wiley in Materials and Corrosion
- Vol. 60 (2) , 119-129
Abstract
Although the complex changes at the steel–concrete interface due to cathodic polarisation are widely acknowledged to have a beneficial influence concerning the cathodic protection (CP) of steel in concrete, some questions concerning the repassivation of carbon steel in consequence of cathodic polarisation are still not satisfactorily clarified. In the recent literature, some indications are presented that repassivation occurs after a certain time of polarisation. Therefore, the investigations discussed in this paper aim to clarify, to what extent the re‐passivation of carbon steel due to cathodic polarisation occurs, and if the ennoblement of OCP is a sufficient indication for repassivation. In a first step, the corrosion state of five nominal equal test specimens was determined by electrochemical impedance spectroscopy (EIS). After determining the initial corrosion state by evaluating the charge transfer resistance and the polarisation resistance, respectively, the specimens were polarised cathodically. Impedance data were recorded before, during and after polarisation. The impedance data were evaluated by equivalent circuit fitting with special attention to charge transfer resistances and the impact of diffusion on the corrosion and polarisation behaviour. The results indicate that the reduction of oxides and oxygen diffusion during cathodic polarisation has strong impact on the systems behaviour and that repassivation effects occur after switching off the polarisation current and during depolarisation, respectively.Keywords
This publication has 35 references indexed in Scilit:
- Modelling of reinforcement corrosion – Influence of concrete technology on corrosion developmentMaterials and Corrosion, 2006
- Anodic growth of passive layers on steel rebars in an alkaline medium simulating the concrete poresElectrochimica Acta, 2006
- Chloride threshold dependence of pitting potential of reinforcementsElectrochimica Acta, 2002
- Galvanic coupling between carbon steel and austenitic stainless steel in alkaline mediaElectrochimica Acta, 2002
- Precision of the Nordic test methods for measuring the chloride diffusion/migration coefficients of concreteMaterials and Structures, 2001
- Cathodic protection and cathodic preventionConstruction and Building Materials, 1996
- The Point Defect Model for the Passive StateJournal of the Electrochemical Society, 1992
- Theory of Steady‐State Passive FilmsJournal of the Electrochemical Society, 1990
- Die Bestimmung von Lochfraßpotentialen unter besonderer Berücksichtigung der galvanokinetischen MeßmethodikMaterials and Corrosion, 1974
- Bestimmung und Anwendung von GleichgewichtspotentialenMaterials and Corrosion, 1969