Teleoperation of ABB industrial robots
Authors:
- Mohsen Moradi DalvandMDMohsen Moradi Dalvand
- Saeid NahavandiSNSaeid Nahavandi
- 13 May 2014
- journal article
- Published by Emerald Publishing in Industrial Robot: the international journal of robotics research and application
- Vol. 41 (3) , 286-295
Abstract
Purpose: – The purpose of this paper is to analyse teleoperation of an ABB industrial robot with an ABB IRC5 controller. A method to improve motion smoothness and decrease latency using the existing ABB IRC5 robot controller without access to any low-level interface is proposed. Design/methodology/approach: – The proposed control algorithm includes a high-level proportional-integral-derivative controller (PID) controller used to dynamically generate reference velocities for different travel ranges of the tool centre point (TCP) of the robot. Communication with the ABB IRC5 controller was performed utilising the ABB PC software development kit. The multitasking feature of the IRC5 controller was used to enhance the communication frequency between the controller and the remote application. Trajectory tracking experiments of a pre-defined three-dimensional trajectory were carried out and the benefits of the proposed algorithm were demonstrated. The robot was intentionally installed on a wobbly table and its vibrations were recorded using a six-degrees-of-freedom force/torque sensor fitted to the tool mounting interface of the robot. The robot vibrations were used as a measure of the smoothness of the tracking movements. Findings: – A communication rate of up to 250 Hz between the computer and the controller was established using C# .Net. Experimental results demonstrating the robot TCP, tracking errors and robot vibrations for different control approaches were provided and analysed. It was demonstrated that the proposed approach results in the smoothest motion with tracking errors of < 0.2 mm. Research limitations/implications: – The proposed approach may be employed to produce smooth motion for a remotely operated ABB industrial robot with the existing ABB IRC5 controller. However, to achieve high-bandwidth path following, the inherent latency of the controller must be overcome, for example by utilising a low-level interface. It is particularly useful for applications including a large number of short manipulation segments, which is typical in teleoperation applications. Social implications: – Using the proposed technique, off-the-shelf industrial robots can be used for research and industrial applications where remote control is required. Originality/value: – Although low-level control interface for industrial robots seems to be the ideal long-term solution for teleoperation applications, the proposed remote control technique allows out-of-the-box ABB industrial robots with IRC5 controllers to achieve high efficiency and manipulation smoothness without requirements of any low-level programming interface.Keywords
This publication has 18 references indexed in Scilit:
- Motion control analysis of a parallel robot assisted minimally invasive surgery/microsurgery system (PRAMiSS)Robotics and Computer-Integrated Manufacturing, 2013
- 1kHz is not enough — How to achieve higher update rates with a bilateral teleoperation system based on commercial hardware2009
- An open architecture for sensory feedback control of a dual‐arm industrial robotic cellIndustrial Robot: the international journal of robotics research and application, 2007
- Present and future robot control development—An industrial perspectiveAnnual Reviews in Control, 2007
- A Unified Passivity-based Control Framework for Position, Torque and Impedance Control of Flexible Joint RobotsThe International Journal of Robotics Research, 2007
- Force‐feedback teleoperation of an industrial robot in a nuclear spent fuel reprocessing plantIndustrial Robot: the international journal of robotics research and application, 2006
- Teleoperation of a Robot Arm in 2D Catching Movements using EMG Signals and a Bio-inspired Motion Law2006
- Extending an industrial robot controllerIEEE Robotics & Automation Magazine, 2005
- The DLR-KUKA Success StoryIEEE Robotics & Automation Magazine, 2005
- Adaptive implicit hybrid force/pose control of industrial manipulators: compliant motion experiments2005