A meta-analysis of airborne asbestos fiber concentrations from work with or around asbestos-containing floor tile
- 2 October 2018
- journal article
- research article
- Published by Taylor & Francis in International Journal of Occupational and Environmental Health
- Vol. 24 (3-4) , 134-148
Abstract
In this meta-analysis, exposures to airborne asbestos during work with or around floor tiles were characterized according to several variables: study, sample type, activity, and task. Personal breathing zone, bystander, and area sample exposure concentrations were differentiated and compared against current occupational exposure limits to asbestos. In total, 22 studies, including 804 personal, 57 bystander, and 295 area samples, were included in the analysis. The arithmetic mean airborne fiber concentrations were 0.05, 0.02, and 0.01 f/cm3 for personal, bystander, and area samples, respectively. Arithmetic mean time-weighted-average fiber concentrations over an 8-h working day were 0.02 and 0.01 f/cm3 for personal and bystander samples, respectively. Phase contrast microscopy (PCM) personal airborne fiber concentrations were highest for maintenance activities, followed by removal and installation. Tasks that involved buffing or burnishing, scoring or snapping, and scraping or lifting had the highest personal PCM concentrations, while stripping floor tile and removing it with chemical solvent had the lowest concentrations. Exposures associated with handling asbestos floor tiles, under working conditions normally encountered, do not generally produce airborne concentrations at levels that exceed the current OSHA PEL nor do they appear to approach the threshold cumulative asbestos dose concentrations that have been previously associated with an increased risk of asbestos-related disease.Keywords
This publication has 28 references indexed in Scilit:
- Re-Creation of Historical Chrysotile-Containing Joint CompoundsInhalation Toxicology, 2008
- Asbestos-containing Floor Tile and Mastic Abatement: Is there Enough Exposure to Cause Asbestos-related Disease?Indoor and Built Environment, 2005
- Airborne Asbestos Concentrations during Abatement of Floor Tile and Mastic: Evaluation of Two Different Containment Systems and Discussion of Regulatory IssuesIndoor and Built Environment, 2001
- An evaluation of personal airborne asbestos exposure measurements during abatement of dry wall and floor tile/masticInternational Journal of Environmental Health Research, 2000
- Asbestos Exposures During Routine Floor Tile Maintenance. Part 2: Ultra High Speed Burnishing and Wet-StrippingApplied Occupational and Environmental Hygiene, 1998
- Asbestos Exposures During Routine Floor Tile Maintenance. Part 1: Spray-Buffing and Wet-StrippingApplied Occupational and Environmental Hygiene, 1998
- Quantification of Fiber Releases for Various Floor Tile Removal MethodsApplied Occupational and Environmental Hygiene, 1996
- Asbestos Fiber Concentrations Resulting from the Installation, maintenance and removal of vinyl‐asbestos floor tileParticle & Particle Systems Characterization, 1991
- Measurement of Asbestos Fiber Concentration above Floor TileParticle & Particle Systems Characterization, 1991
- Indoor Airborne Asbestos Pollution: from the Ceiling and the FloorScience, 1982