Analytical Modeling of Residual Stress in Laser Powder Bed Fusion Considering Part’s Boundary Condition
Open Access
Abstract
Rapid and accurate prediction of residual stress in metal additive manufacturing processes is of great importance to guarantee the quality of the fabricated part to be used in a mission-critical application in the aerospace, automotive, and medical industries. Experimentations and numerical modeling of residual stress however are valuable but expensive and time-consuming. Thus, a fully coupled thermomechanical analytical model is proposed to predict residual stress of the additively manufactured parts rapidly and accurately. A moving point heat source approach is used to predict the temperature field by considering the effects of scan strategies, heat loss at part’s boundaries, and energy needed for solid-state phase transformation. Due to the high-temperature gradient in this process, the part experiences a high amount of thermal stress which may exceed the yield strength of the material. The thermal stress is obtained using Green’s function of stresses due to the point body load. The Johnson–Cook flow stress model is used to predict the yield surface of the part under repeated heating and cooling. As a result of the cyclic heating and cooling and the fact that the material is yielded, the residual stress build-up is precited using incremental plasticity and kinematic hardening behavior of the metal according to the property of volume invariance in plastic deformation in coupling with the equilibrium and compatibility conditions. Experimental measurement of residual stress was conducted using X-ray diffraction on the fabricated IN718 built via laser powder bed fusion to validate the proposed model.Keywords
This publication has 41 references indexed in Scilit:
- Laser Powder Bed Fusion of Inconel 718: Residual Stress Analysis Before and After Heat TreatmentMetals, 2019
- The effect of process parameters on residual stress evolution and distortion in the laser powder bed fusion of Ti-6Al-4VAdditive Manufacturing, 2019
- An overview of residual stresses in metal powder bed fusionAdditive Manufacturing, 2019
- Modeling of texture development in additive manufacturing of Ni-based superalloysThe International Journal of Advanced Manufacturing Technology, 2019
- Invited review article: Metal-additive manufacturing—Modeling strategies for application-optimized designsAdditive Manufacturing, 2018
- Neutron residual stress measurement and numerical modeling in a curved thin-walled structure by laser powder bed fusion additive manufacturingMaterials & Design, 2017
- Laser powder-bed fusion of Inconel 718 to manufacture turbine bladesThe International Journal of Advanced Manufacturing Technology, 2017
- Laser powder bed fusion of Ti-6Al-4V parts: Thermal modeling and mechanical implicationsInternational Journal of Machine Tools and Manufacture, 2017
- Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zonesActa Materialia, 2016
- Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturingJournal of Materials Processing Technology, 2014