THE ANODIC potentiodynamic cyclic polarization behavior of Cu/10 Ni and Cu/30 Ni alloys in different wide range of LiBr concentrations from 10(-1) to 9 M was investigated. The results obtained showed that the breakdown potential, hysteresis loop area and passive current were recorded at higher value of potentials in case of Cu/10 Ni in comparison with Cu/30 Ni. The current density showed higher values during the first few moment of polarization of both alloys studied as result of the changes the taking place on the surface. At 5x10(-1) M of LiBr, in case of Cu/10 Ni, two breakdown potentials yielded two hysteresis loops, one of them was at 700 mV and the second was at more anodic potential. These are not recorded in case of Cu/30 Ni where pitting corrosion was manifested at 2 and 4 M LiBr only. The current - time measurement and surface examination of the electrode in case of Cu/30 Ni at 3x10(-1) and 5x10(-1)M LiBr showed that the film formed at low anodic potential of 150 mV clarify the formation of small number of initiated pits which are surrounded by a passive and protective film of doped Cu2O and the surface shown enrichment of Ni. While at all the potential studied for the Cu/10 Ni and Cu/30 Ni the surface of the alloy suffered from denickelification.