Effect of Cold-Rolling Directions on Recrystallization Texture Evolution of Pure Iron
Open Access
Abstract
The influence of cold-rolling directions on the recrystallization texture evolution of pure iron was examined. As-received pure iron sheets were cold-rolled under two different conditions (specimens A and B). Specimen A was cold-rolled in the vertical direction against the cold-rolling direction of the as-received sheet. Specimen B was cold-rolled in the vertical direction against the cold-rolling direction of the as-received sheet, and then in the cold-rolling direction of the as-received sheet. Cold-rolled specimens were heated to each desired temperature before being quenched in water to room temperature (298 ± 2 K). Both cold-rolled specimens showed the development of γ-fiber and {100} orientation. Additionally, γ-fiber formed comparatively more in cold-rolled specimen A, while α-fiber developed comparatively more in cold-rolled specimen B. Strain distribution in cold-rolled specimen A was presumably inhomogeneous, whereas that in cold-rolled specimen B was rather uniform at the macro-scale. The formation of γ-fiber was confirmed in annealed specimen A. In annealed specimen B, however, the recrystallization texture tended to be random, and the formation of α-fiber was observed. Furthermore, the formation of Goss orientation in both annealed specimens was established. Recrystallized ferrite grains with Goss orientation nucleated in high strain regions of cold-rolled specimen. These findings show that by devising the cold-rolling direction, it is possible to discover new types of recrystallization textures.Keywords
This publication has 25 references indexed in Scilit:
- Recrystallized {311}〈136〉 orientation in ferrite steelsScripta Materialia, 2012
- Incomplete Recrystallization and Subsequent Microstructural Evolution during Intercritical Annealing in Cold-rolled Low Carbon SteelsISIJ International, 2010
- Deep Drawability of Electro-deposited Pure Iron Having an Extremely Sharp ‹111›//ND TextureISIJ International, 2008
- Deformation banding and recrystallization of α fibre components in heavily rolled IF steelActa Materialia, 2004
- The Influence of Solute Carbon in Cold-rolled Steels on Shear Band Formation and Recrystallization TextureISIJ International, 2004
- Effect of Microstructure Prior to Cold-rolling on Planar Anisotropy of r-value in Cold-rolled High Carbon Steel SheetsJournal of the Japan Institute of Metals and Materials, 2004
- Recrystallization and Related Phenomena. Texture Evolution of IF Steel Due to Recrystallization.ISIJ International, 1998
- Influence of Ferrite Rolling Temperature on Microstructure and Texture in Deformed Low C and IF Steels.ISIJ International, 1997
- Role of shear bands in annealing texture formation in 3%Si-Fe(111)[112] single crystals.ISIJ International, 1989
- Effect of Carbide Size, Cold Reduction and Heating Rate in Annealing on Deep‐Drawability of Low‐Carbon,Capped Cold‐Rolled Steel SheetTexture, Stress, and Microstructure, 1978