Characterization of High-Pressure Hydrogen Leakages
- 26 December 2023
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (5) , 1-24
Abstract
Reduction of gas turbine (GT) carbon emissions relies on a strategy for fueling the engines with pure or blended hydrogen. The major technical challenges to solve are (i) the adjustments to the engine and in particular the combustion chamber and (ii) a series of issues to solve to guarantee safe operations. In fact, compared to natural gas, hydrogen fueling implies higher risks of explosion in case of leak in the turbine enclosure and a more careful design of the ventilation system. Thus, a deeper comprehension of hydrogen leak scenarios is needed to adjust the safe design strategy of the enclosure. To this aim, a series of numerical investigations was carried out to understand how different methane–hydrogen blends (from pure methane to pure hydrogen) behave when leaking from a pipeline with fuel pressure that span from 1.5 to 4.5 MPa. The different fuel blends' leaks in form of underexpanded jets were studied under different cross-flow ventilation conditions, with ventilation velocity spanning from 0 m/s to 5 m/s. When compared to pure methane, the outcome is a three times longer penetration distance for pure hydrogen axisymmetric flammable clouds, whereas in cross-flow conditions a more complex three-dimensional behavior was found, potentially opening a safety-related concerns discussed in the paper.Keywords
This publication has 19 references indexed in Scilit:
- Evaluation of notional nozzle approaches for CFD simulations of free-shear under-expanded hydrogen jetsInternational Journal of Hydrogen Energy, 2012
- Ignitability and mixing of underexpanded hydrogen jetsInternational Journal of Hydrogen Energy, 2012
- Helium dispersion following release in a 1/4-scale two-car residential garageInternational Journal of Hydrogen Energy, 2012
- Experimental study of hydrogen release accidents in a vehicle garageInternational Journal of Hydrogen Energy, 2011
- Large-scale hydrogen release in an isothermal confined areaInternational Journal of Hydrogen Energy, 2011
- CFD modelling of hydrogen release, dispersion and combustion for automotive scenariosJournal of Loss Prevention in the Process Industries, 2008
- Characterization of high-pressure, underexpanded hydrogen-jet flamesInternational Journal of Hydrogen Energy, 2007
- A new k-ϵ eddy viscosity model for high reynolds number turbulent flowsComputers & Fluids, 1995
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- The numerical computation of turbulent flowsComputer Methods in Applied Mechanics and Engineering, 1974