Impact of Porous Transport Layer Morphology on the Performance of Proton Exchange Membrane Water Electrolyzers with Ultra-Low Iridium Loadings
Open Access
- 1 April 2026
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (14) , 20547-20558
Abstract
Reducing Ir loadings in proton exchange membrane water electrolyzer anodes is critical for lowering capital expenses. Loading reduction could be achieved by improving the Ir activity via doping/alloying and/or the development of advanced microstructures. However, the anode porous transport layer (PTL) is a comparatively simple component whose properties also impact Ir utilization. Therefore, well-designed PTLs may also enable reduced Ir loadings. In this work, we survey eight PTLs from various manufacturers to observe their impact on cell performance at low (0.4 mgIr cm–2) and ultralow (0.1 mgIr cm–2) Ir loadings. The PTLs were characterized by their microstructural properties, including porosity, particle size distribution, and pore size distribution. Electrochemical cell performance was correlated to PTL morphology, and it was found that PTLs with lower porosities and smaller particle and pore radii enabled good performance even at ultralow Ir loadings. 1000-h durability testing indicated that using lower porosity PTLs can significantly improve durability behavior. A runaway voltage phenomenon was observed during durability testing of cells with ultralow Ir loadings, which was caused by increases in both anode and cathode overpotentials. Furthermore, we observed that the beginning of test performance of 0.1 mgIr cm–2 cells correlates to the 1000-h degradation rates of 0.4 mgIr cm–2 cells, suggesting that for the Ir catalyst used in this work, short-term testing at ultralow loadings can be used as an indicator of long-term degradation at higher loadings.Keywords
Funding Information
- U.S. Department of Energy (DOE)
This publication has 32 references indexed in Scilit:
- Durable Thin‐Film Porous Transport Electrodes for High Current Density PEM Water ElectrolysisAdvanced Science, 2026
- Linking structure to performance: Characterization of porous transport layers for high-pressure water electrolysisInternational Journal of Hydrogen Energy, 2025
- Proton exchange membrane electrolysis benchmarking: Identifying and removing sources of variation in test stations, hardware, and membrane electrode assembly fabricationInternational Journal of Hydrogen Energy, 2025
- The critical role of the anode porous transport layer/catalyst layer interface of polymer electrolyte membrane water electrolyzers: A parametric analysisChemical Engineering Journal, 2025
- Porous transport layer influence on overpotentials in PEM water electrolysis at low anode catalyst loadingsApplied Catalysis B: Environment and Energy, 2024
- A review on understanding and identifying degradation mechanisms in PEM water electrolysis cells: Insights for stack application, development, and researchInternational Journal of Hydrogen Energy, 2024
- Ultrathin Microporous Transport Layers: Implications for Low Catalyst Loadings, Thin Membranes, and High Current Density Operation for Proton Exchange Membrane ElectrolysisAdvanced Energy Materials, 2024
- Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode AssemblyElectrochemical Energy Reviews, 2023
- Gas-diffusion-layer structural properties under compression via X-ray tomographyJournal of Power Sources, 2016
- An analysis of degradation phenomena in polymer electrolyte membrane water electrolysisJournal of Power Sources, 2016