Diode-based additive manufacturing of metals using an optically-addressable light valve
Open Access
- 10 May 2017
- journal article
- Published by Optica Publishing Group in Optics Express
- Vol. 25 (10) , 11788-11800
Abstract
Selective Laser Melting (SLM) of metal powder bed layers, whereby 3D metal objects can be printed from a digital file with unprecedented design flexibility, is spurring manufacturing innovations in medical, automotive, aerospace and textile industries. Because SLM is based on raster-scanning a laser beam over each layer, the process is relatively slow compared to most traditional manufacturing methods (hours to days), thus limiting wider spread use. Here we demonstrate the use of a large area, photolithographic method for 3D metal printing, using an optically-addressable light valve (OALV) as the photomask, to print entire layers of metal powder at once. An optical sheet of multiplexed ~5 kW, 20 ms laser diode and ~1 MW, 7 ns Q-switched laser pulses are used to selectively melt each layer. The patterning of near infrared light is accomplished by imaging 470 nm light onto the transmissive OALV, which consists of polarization-selective nematic liquid crystal sandwiched between a photoconductor and transparent conductor for switching.Keywords
Funding Information
- Lawrence Livermore National Laboratory (LLNL) (14-SI-004)
This publication has 19 references indexed in Scilit:
- Multiscale Modeling of Powder Bed–Based Additive ManufacturingAnnual Review of Materials Research, 2016
- Optics Recycle Loop Strategy for NIF Operations above UV Laser-Induced Damage ThresholdFusion Science and Technology, 2016
- Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challengesApplied Physics Reviews, 2015
- High temperature material properties of IN738LC processed by selective laser melting (SLM) technologyRapid Prototyping Journal, 2013
- Programmable beam spatial shaping system for the National Ignition Facility2011
- Residual stresses in selective laser sintering and selective laser meltingRapid Prototyping Journal, 2006
- Selective laser melting of iron-based powderJournal of Materials Processing Technology, 2004
- Nearly diffraction-limited laser focal spot obtained by use of an optically addressed light valve in an adaptive-optics loop.Optics Letters, 1998
- Liquid crystal light valve using bulk monocrystalline Bi_12SiO_20 as the photoconductive materialApplied Optics, 1982
- Application Of The Liquid Crystal Light Valve To Real-Time Optical Data ProcessingOptical Engineering, 1978