A DC-flux-injection approach for thermal monitoring of induction machines with direct torque control
Authors:
- 1 September 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 2115-2122
Abstract
This paper proposes a parameter-based approach for thermal monitoring of direct-torque-controlled (DTC) induction machines (IM), where the stator resistance Rs is used as a direct indicator of average stator winding temperature. The stator resistance is estimated via the DC current injection method. In a DTC drive system, the ultimate challenge is how to impose the DC current offset via the existing flux and torque control loop. In this paper, the quantitative relationship between desired current injection and the corresponding flux linkage offset is firstly derived; and the current injection is then achieved by superimposing flux linkage offset in the flux control loop. Simulation results validate the proposed methodology, and the experimental data proves that this method achieves accurate temperature estimation under various operating conditions. This simple and efficient thermal monitoring technique is particularly advantageous since it eliminates the need for embedded thermocouples, requires no hardware change to conventional DTC drive systems and has a minimal impact on the IM's normal operation.Keywords
This publication has 11 references indexed in Scilit:
- A torque-injection-based approach for thermal monitoring of induction machines with direct torque control2013
- A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter DrivesIEEE Transactions on Power Electronics, 2012
- A nonintrusive thermal monitoring method for closed-loop drive-fed induction machines2011
- A DC Signal Injection-Based Thermal Protection Scheme for Soft-Starter-Connected Induction MotorsIEEE Transactions on Industry Applications, 2009
- A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-Connected Induction MachinesIEEE Transactions on Industrial Electronics, 2008
- A novel method for online stator resistance estimation of inverter-fed ac-machines without temperature sensors2008
- A remote and sensorless thermal protection scheme for small line-connected AC machinesIEEE Transactions on Industry Applications, 2003
- A simplified thermal model for variable speed self cooled industrial induction motor2002
- In-situ determination of thermal coefficients for electrical machinesIEEE Transactions on Energy Conversion, 1995
- Lumped parameter thermal model for electrical machines of TEFC designIEE Proceedings B Electric Power Applications, 1991