Influence of Molybdenum on the Microstructure, Mechanical Properties and Corrosion Resistance of Ti20Ta20Nb20(ZrHf)20−xMox (Where: x = 0, 5, 10, 15, 20) High Entropy Alloys
Open Access
Abstract
The presented work was focused on investigating the influence of the (hafnium and zirconium)/molybdenum ratio on the microstructure and properties of Ti20Ta20Nb20(ZrHf)20−xMox (where: x = 0, 5, 10, 15, 20 at.%) high entropy alloys in an as-cast state. The designed chemical composition was chosen due to possible future biomedical applications. Materials were obtained from elemental powders by vacuum arc melting technique. Phase analysis revealed the presence of dual body-centered cubic phases. X-ray diffraction showed the decrease of lattice parameters of both phases with increasing molybdenum concentration up to 10% of molybdenum and further increase of lattice parameters. The presence of two-phase matrix microstructure and hafnium and zirconium precipitates was proved by scanning and transmission electron microscopy observation. Mechanical property measurements revealed decreased micro- and nanohardness and reduced Young’s modulus up to 10% of Mo content, and further increased up to 20% of molybdenum addition. Additionally, corrosion resistance measurements in Ringers’ solution confirmed the high biomedical ability of studied alloys due to the presence of stable oxide layers.Keywords
Funding Information
- Uniwersytet Śląski w Katowicach (Research Excellence Initiative of the University of Silesia in Katowice)
This publication has 85 references indexed in Scilit:
- Prediction of high-entropy stabilized solid-solution in multi-component alloysMaterials Chemistry and Physics, 2012
- Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phaseProgress in Natural Science: Materials International, 2011
- Refractory high-entropy alloysIntermetallics, 2010
- Corrosion resistance and in vitro response of laser‐deposited Ti‐Nb‐Zr‐Ta alloys for orthopedic implant applicationsJournal of Biomedical Materials Research Part A, 2010
- Corrosion behavior of Ti and TI6Al4V in citrate buffers containing fluoride ionsMaterials Research, 2010
- Biocompatibility of β-stabilizing elements of titanium alloysBiomaterials, 2004
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Anisotropic properties of human tibial cortical bone as measured by nanoindentationJournal of Orthopaedic Research, 2002
- Biocompatibility and osteogenesis of refractory metal implants, titanium, hafnium, niobium, tantalum and rheniumBiomaterials, 2001
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992