Capacitive sensor for engine oil deterioration measurement
- 1 January 2018
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1943 (1) , 020099
Abstract
A simple system or mechanism for engine Oil (lubricating oil) deterioration monitoring is a need. As engine oil is an important element in I C engines and it is exposed to various strains depending on the operating conditions. If it becomes contaminated with dirt and metal particles, it can become too thick or thin and loses its protective properties, leads to unwanted friction. In turn, to avoid an engine failure, the oil must be changed before it loses its protective properties, which may be harmful to engine which deteriorates vehicle performance. At the same time, changing the lubricant too early, cause inefficient use of already depleting resources, also unwanted impact on the environment and economic reasons. Hence, it will be always helpful to know the quality of the oil under use. With this objective, the research work had been undertaken to develop a simple capacitance sensor for quantification of the quality of oil under use. One of the investigated parameter to quantify oil degradation is Viscosity (as per standard testing procedure: DIN 51562-1). In this research work, an alternative method proposed which analyzing change in capacitance of oil, to quantify the quality of oil underuse and compared to a conventional standard method. The experimental results reported in this paper shows trend for the same. Engine oil of grade SAE 15W40 used for light-duty vehicle, vans and passenger cars is used for experimentation. Suggested method can form a base for further research to develop a cost-effective method for indicating the time to change in engine oil quality have been presented.Keywords
This publication has 14 references indexed in Scilit:
- Analyzing the relationship between the deterioration of engine oil in terms of change in viscosity, conductivity and transmittance2017
- Reliable Geographical Forwarding in Cognitive Radio Sensor Networks Using Virtual ClustersSensors, 2014
- Comparative Study of Used and Unused Engine Oil (Perodua Genuine and Castrol Magnatec Oil) based on Property Analysis basisProcedia Engineering, 2013
- Application of dielectric spectroscopy for engine lubricating oil degradation monitoringSensors and Actuators A: Physical, 2011
- Virgin and recycled engine oil differentiation: A spectroscopic studyJournal of Environmental Management, 2009
- A Semicylindrical Capacitive Sensor With Interface Circuit Used for Flow Rate MeasurementIEEE Sensors Journal, 2006
- Online condition monitoring of engine oilIndustrial Lubrication and Tribology, 2005
- Low-cost condition monitoring sensor for used oil analysisWear, 2005
- An automotive engine oil viscosity sensorIEEE Sensors Journal, 2003
- Electrical techniques for monitoring the condition of lubrication oilMeasurement Science and Technology, 2003