Formation of a large‐scale shish‐kebab structure of polyoxymethylene in the melt spinning and the crystalline morphology evolution after hot stretching
- 27 November 2014
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 26 (1) , 77-84
Abstract
Polyoxymethylene (POM) fiber was produced by melt spinning with a high take‐up speed, which imposed a strong flow field. An unexpected formation of a shish‐kebab morphology with multiple shish of POM fibers was reported for the first time. This morphology is a large‐scale shish kebab with a diameter of 10.5 µm. Further orientation of the POM fiber was obtained by hot stretching twice at 160°C. Two crystalline morphology evolution processes were also observed: (i) the process from the large‐scale shish‐kebab to the deformed small shish‐kebab and (ii) the process from the deformed small shish‐kebab to the perfect whiskers. Compared with the melt spinning fiber, fiber tensile strength with first and second hot stretching increased by 976% and 1705%, respectively. The crystalline melting behavior of fibers significantly changes after the first and second hot stretching. The flow field induces a large number of extended chain crystals. Copyright © 2014 John Wiley & Sons, Ltd.Keywords
Funding Information
- Open Funds for Basic Research Project of State Key Laboratory of High Performance Civil Engineering (2013CEM001)
- Outstanding Young Scholars Foundation of Sichuan University (2011SCU04A13)
- National Natural Science Foundation of China (51473104, 51003066)
This publication has 49 references indexed in Scilit:
- Polyethylene/carbon nanotube nano hybrid shish-kebab obtained by solvent evaporation and thin-film crystallizationPolymer, 2011
- Transient solutions of the dynamics in low-speed fiber spinning process accompanied by flow-induced crystallizationJournal of Non-Newtonian Fluid Mechanics, 2005
- Structural Analysis of Polyoxymethylene Whisker Single Crystal by the Electron Diffraction MethodMacromolecules, 2004
- Structural changes in isothermal crystallization process of polyoxymethylene investigated by time-resolved FTIR, SAXS and WAXS measurementsPolymer, 2003
- Structural changes in non-isothermal crystallization process of melt-cooled polyoxymethylene. [I] Detection of infrared bands characteristic of folded and extended chain crystal morphologies and extraction of a lamellar stacking modelPolymer, 2003
- Structural changes in non-isothermal crystallization process of melt-cooled polyoxymethylene[II] evolution of lamellar stacking structure derived from SAXS and WAXS data analysisPolymer, 2003
- Crystallization of poly(ethylene terephthalate) under tensile strain: crystalline development versus mechanical behaviourPolymer, 2003
- Structure development during the melt spinning of poly(oxymethylene) fiberPolymer, 2001
- Deformation of oriented high density polyethylene shish-kebab filmsJournal of Materials Science, 1989
- Roller drawing of polyoxymethyleneJournal of Applied Polymer Science, 1986