SiO 2 thickness determination by x-ray photoelectron spectroscopy, Auger electron spectroscopy, secondary ion mass spectrometry, Rutherford backscattering, transmission electron microscopy, and ellipsometry
Authors:
- 1 January 2000
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 18 (1) , 440-444
Abstract
As the of ion implants steadily decreases an ever-increasing percentage of the implant species lies in the oxide layer and is, therefore, not electrically active. For this reason, it is important to have analytical techniques capable of accurately measuring the thickness of ultrathin oxide layers. A round-robin study was performed on a series of films ranging from 0.3 to 20 nm in order to evaluate the advantages and disadvantages of five commonly used analytical techniques. High-resolution cross-section transmission electron microscopy (TEM) offers the only true measurement of oxide thickness because no density assumptions are made. In this study, TEM is used as the standard for all the other techniques. X-ray photoelectron spectroscopy and Auger electron spectroscopy offer precise measurements for ultrathin (15 nm) due to the exponential decay functions that describe the sampling depth in both techniques. Secondary ion mass spectrometry (SIMS) has historically been used for characterizing relatively thick films (>10 nm) but not for thinner films because of atomic mixing effects. Encapsulating oxides with amorphous silicon prior to performing a SIMS experiment can negate these effects. A comparison of SIMS on encapsulated and as received films is made. Rutherford backscattering is an excellent technique for determining oxide thickness over a wide thickness range by channeling the Si signal from the crystalline substrate and analyzing oxygen from the amorphous oxide. Ellipsometry, being both rapid and low cost, is one of the most widely used techniques capable of accurate measurements on thick films (>10 nm).
Keywords
This publication has 19 references indexed in Scilit:
- SiO 2 film thickness metrology by x-ray photoelectron spectroscopyApplied Physics Letters, 1997
- X-ray photoelectron spectroscopy study of submonolayer native oxides on HF-treated Si surfacesJournal of Vacuum Science & Technology A, 1995
- Film thickness measurements of SiO 2 by XPSSurface and Interface Analysis, 1994
- Determination of overlayer thickness by angle‐resolved XPS: A comparison of algorithmsSurface and Interface Analysis, 1993
- Calculations of electron inelastic mean free paths. III. Data for 15 inorganic compounds over the 50–2000 eV rangeSurface and Interface Analysis, 1991
- Thickness measurement of thin dielectrics with electron spectroscopyAnalytical and Bioanalytical Chemistry, 1989
- A reassessment of electron escape depths in silicon and thermally grown silicon dioxide thin filmsSurface Science, 1988
- Studies of SiO2 and SiSiO2 interfaces by XPSSurface Science, 1979
- Properties of oxidized silicon as determined by angular-dependent X-ray photoelectron spectroscopyChemical Physics Letters, 1976
- Electron mean escape depths from x−ray photoelectron spectra of thermally oxidized silicon dioxide films on siliconJournal of Vacuum Science and Technology, 1975