Investigations on formability of tailor laminated sheets in single point incremental forming
Authors:
- 7 February 2022
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 236 (10) , 1393-1405
Abstract
In this article, formability of tailor laminated sheets in single point incremental forming (SPIF) is investigated using forming limit curve (FLC) and maximum formable wall angle determined theoretically and incremental sheet forming tests. Two different sheet materials namely aluminum alloy AA5083 and polycarbonate were laminated in two different configurations, that is, AA5083/PC, and AA5083/PC/AA5083. FLCs were determined for the laminated sheets using deformation instability method and compared to that of the base sheets. It was observed that formability of the laminated sheets was higher than that of the PC and AA5083 sheets for plane strain case. The maximum formable wall angle was determined by varying the wall angle till the onset of fracture through deforming the sheet into square pyramid shapes. Deformation depths at the onset of fracture for the incrementally formed laminated sheets got decreased with the increase of forming wall angle. Optical macrographs of the cross-sections of the deformed laminated sheets with maximum forming wall angles were taken, and variations of sheet thicknesses along the center line of the deformed sheets were compared for the different cases. Higher triaxiality of AA5083/PC/AA5083 sheet results in lower formability compared to AA5083/PC sheet obtained from membrane analysis. Formation of bump structure due to delamination during SPIF of laminated sheets could be avoided using proper selection of tool path.Keywords
This publication has 35 references indexed in Scilit:
- Effects of incremental depth and tool rotation on failure modes and microstructural properties in Single Point Incremental Forming of polymersJournal of Materials Processing Technology, 2015
- Investigation of material deformation mechanism in double side incremental sheet formingInternational Journal of Machine Tools and Manufacture, 2015
- Numerical and experimental studies of single-stroke bumper forming using high-strength steel and laminate sheetsProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015
- Design rules and applications of single-point incremental formingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2014
- Tool path design for enhancement of accuracy in single-point incremental formingProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2013
- Forming limit diagram prediction of AA5052/polyethylene/AA5052 sandwich sheetsMaterials & Design (1980-2015), 2013
- Single point incremental forming of PVC: Experimental findings and theoretical interpretationEuropean Journal of Mechanics - A/Solids, 2010
- Single point incremental forming of PVCJournal of Materials Processing Technology, 2009
- Single point incremental forming of polymersCIRP Annals, 2009
- Incremental forming of sandwich panelsJournal of Materials Processing Technology, 2008