A Lightweight, Abrasion‐Resistant Polybutadiene Rubber/Styrene Butadiene Rubber Foam Prepared by Three‐Step Process for Footwear Outsole Applications
Authors:
- 12 November 2021
- journal article
- research article
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 307 (2) , 2100702
Abstract
Herein, a developed microcellular foam from polybutadiene rubber (BR) and styrene butadiene rubber (SBR), which is prepared by prevulcanization, supercritical foaming, and secondary vulcanization processes is reported. It has excellent abrasion resistance and with low density. The foaming process is successfully achieved with the assistance of eco‐friendly supercritical nitrogen (sc‐N2). The microstructural analysis of BR/SBR foams indicates that the cell structure of BR/SBR foams has an obvious effect with the increased prevulcanization time. The thickness of solid skin on the foam surface is observed using scanning electron microscope, which revealed that the prevulcanization time is also a direct factor influencing the thickness of solid skin, where the fundamental cause is explained from two aspects, i.e., gas escape and rubber vulcanization. The prevulcanization time to meet the abrasion resistance characteristics has determined based on the cell structure and abrasion solid skin thickness of BR/SBR foams at different time zone of prevulcanizations. As a result, BR/SBR foams prepared by this process have a low relative volume loss (62.6–117.1 mm3) and a desirable density (0.50–0.71 g cm−3) at a prevulcanization time of 15–17 min.Keywords
This publication has 39 references indexed in Scilit:
- Durability of running shoes with ethylene vinyl acetate or polyurethane midsolesJournal of Sports Sciences, 2012
- Preparation of microcellular thermoplastic elastomer foams from polystyrene‐b‐ethylene‐butylene‐b‐polystyrene (SEBS) and their blends with polystyreneJournal of Applied Polymer Science, 2012
- Effects of temperature on the material characteristics of midsole and insole footwear foams subject to quasi-static compressive and shear force loadingMaterials & Design (1980-2015), 2012
- New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxideProgress in Polymer Science, 2011
- Thermal and mechanical properties of microcellular thermoplastic SBS/PS/SBR blend: effect of crosslinkingPolymer, 2011
- Polyurethane-foam midsoles in running shoes - impact energy and dampingProcedia Engineering, 2010
- Effect of Filler and Urethane Rubber on NR/BR with Nanosilica: Morphology and WearJournal of Thermoplastic Composite Materials, 2010
- Structure and properties of closed‐cell foam prepared from irradiation crosslinked silicone rubberJournal of Applied Polymer Science, 2009
- Generation of microcellular polyurethane with supercritical carbon dioxideJournal of Applied Polymer Science, 2007
- Prediction of cellular structure in free expansion of viscoelastic mediaJournal of Applied Polymer Science, 1998