Mechanical improvement of carbon fiber/epoxy composites by sizing functionalized carbon nanotubes on fibers
Authors:
- 7 May 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (12) , 10645-10653
Abstract
A sizing agent mainly consisting of polyethersulfone and acidified multi‐walled carbon nanotubes (MWCNT) was developed for surface modification of carbon fibers (CF) to enhance the interfacial bond and to form carbon fiber‐carbon nanotube (CF‐MWCNT) multiscale reinforcements. To prepare the modified carbon fiber/epoxy resin composites (CFRP), a vacuum molding technique was used in this study. The effects of the MWCNT‐containing sizing agent on the morphology and chemical structure of the CF surface were observed by scanning electron microscopy and Fourier transform infrared spectroscopy. The influence of MWCNT length and content on the mechanical properties of CFRP were also studied. The experimental results showed that the strength of the CFRP decreased with the increase of MWCNT length, and the MWCNT with a content of 0.05 wt% had a good reinforced effect on the CFRP. After the sizing treatment, the interlaminar shear strength (ILSS) of the CFRP is increased. These enhancements are attributed to the improved mechanical bonding and chemical bonding between CF and resin matrix. The MWCNT provides nanosized rough surface to CF and these acidified MWCNTs attached to the surface of CF with polar oxygen‐containing functional groups improve the compatibility with reinforcement and resin matrix.Highlights: Carbon fiber was modified by a sizing agent mainly consisting of polyethersulfone and acidified carbon nanotube (CNT). CNTs enhance the interfacial chemical bonding and mechanical bonding. The CNT length affects the mechanical properties of the carbon fiber/epoxy resin composites (CFRP). The modified carbon fiber has enhanced the mechanical properties of the CFRP.Keywords
Funding Information
- National Key Research and Development Program of China
This publication has 34 references indexed in Scilit:
- Interface engineering of carbon fiber composites using CNT: A reviewPolymer Composites, 2023
- Simultaneously reducing the modulus difference and smoothing the modulus transition through bi-directional structural design for enhancing interfacial properties of carbon fiber/epoxy compositesComposites Communications, 2023
- Effects of Length and Oxidation of Multi-walled Carbon Nanotubes on the Mechanical and Electrical Properties for Epoxy Matrix CompositesFibers and Polymers, 2022
- Improving the interfacial properties of carbon fiber–epoxy resin composites with a graphene‐modified sizing agentJournal of Applied Polymer Science, 2018
- Interfacial enhancement of carbon fiber composites by growing TiO2 nanowires onto amine-based functionalized carbon fiber surface in supercritical waterApplied Surface Science, 2018
- Remarkable improvement in interfacial shear strength of carbon fiber/epoxy composite by large‐scare sizing with epoxy sizing agent containing amine‐treated MWCNTsPolymer Composites, 2016
- Optimization of interfacial microstructure and mechanical properties of carbon fiber/epoxy composites via carbon nanotube sizingApplied Surface Science, 2015
- Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibersCarbon, 2013
- Handbook of Composites1998
- The Potential for the use of composite materials in marine structuresMarine Structures, 1994