Compact Dual-Band Rectifier with Self-Matched Branches Using Comprehensive Impedance Control

Authors:
Open Access
Publisher website
Google Scholar
Abstract
The use of multi-band matching for rectifiers leads to design complexity. Instead, recent advancements suggested self-matched branches combined in parallel to enable multi-band operation. However, this method controls only the imaginary part. In this paper, we propose an efficient dual-band rectifier with compact realization. The rectifier consists of two self-matched parallel branches. Each branch provides comprehensive impedance control over real and imaginary parts in the corresponding band independent of the design frequency. The branch impedance matching is analyzed theoretically, and design equations are presented. To verify the proposed theory, a compact dual-band rectifier was fabricated with a compact area of only 0.42 cm2 after excluding the area required for the RF connector. The measured RF-DC power conversion efficiency (PCE) was >50% for input power (Pin) ranging from −5.5 dBm to 11 dBm at 390 MHz with a peak of 69%. Also, the PCE was >50% for P_in ranging from −4 dBm to 12 dBm at 690 MHz with a peak of 68%. The fabricated rectifier operates with a wide load range from 0.5 KΩ to 3 KΩ with PCE > 50% at both bands when P_in = 5 dBm.
Funding Information
  • Japan Society for the Promotion of Science (JSPS) Kakenhi (22K14260)
  • VLSI Design and Education Center (VDEC) (22K14260)

This publication has 30 references indexed in Scilit: