Feature profile evolution during shallow trench isolation etching in chlorine-based plasmas. III. The effect of oxygen addition
Authors:
- 1 July 2013
- journal article
- research article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 31 (4)
Abstract
The effect of oxygen addition to chlorine plasma during shallow trench isolation etching is quantified in this work. Specifically, the electron density and the electron temperature in an electron cyclotron resonance reactor were characterized by a Langmuir probe and were found to remain relatively constant upon O2 addition. The silicon etching rates were found to increase with the square root of the ion energy, suggesting the etching reaction is limited by the momentum transfer from ions to the surface. A relatively small amount of oxygen addition (<10%) to the chlorine plasma simultaneously changes the reactor wall conditions and surface kinetics, since oxygen becomes actively involved in the surface reactions. The change in the chamber wall conditions and surface kinetics leads to the change in both the amount of etch products and the etched feature profile. The incorporation of oxygen on the surface results in a significant change of the etched surface morphology and its composition. This work suggests a small amount of O2 addition to Cl2 plasmas in shallow trench isolation etching changes the etching behavior primarily through modifying the kinetics on etched surfaces. A multiscale etch model consisting of translating mixed layer and Monte Carlo modules for bulk and feature scale etching, respectively, was successfully applied to this case, demonstrating good agreement with the experimental results.Keywords
This publication has 44 references indexed in Scilit:
- Modeling Cl2/O2/Ar inductively coupled plasmas used for silicon etching: effects of SiO2chamber wall coatingPlasma Sources Science and Technology, 2011
- Simultaneous Etching and Deposition Processes during the Etching of Silicon with a Cl2/O2/Ar Inductively Coupled PlasmaPlasma Processes and Polymers, 2011
- The low pressure Cl2/O2discharge and the role of ClOPlasma Sources Science and Technology, 2010
- Studies of chlorine-oxygen plasmas and evidence for heterogeneous formation of ClO and ClO2Journal of Applied Physics, 2009
- Investigation of etching and deposition processes of Cl2/O2/Ar inductively coupled plasmas on silicon by means of plasma–surface simulations and experimentsJournal of Physics D: Applied Physics, 2009
- Formation and removal of composite halogenated silicon oxide and fluorocarbon films deposited on chamber walls during plasma etching of multiple film stacksJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2002
- Deposition of silicon oxychloride films on chamber walls during Cl2/O2 plasma etching of SiJournal of Vacuum Science & Technology A, 2002
- Is there LOCOS after LOCOS?Solid-State Electronics, 1997
- Kinetic study of low energy argon ion-enhanced plasma etching of polysilicon with atomic/molecular chlorineJournal of Vacuum Science & Technology A, 1997
- Effects of O 2 Feed Gas Impurity on Cl2 Based Plasma Etching of PolysiliconJournal of the Electrochemical Society, 1992