Salt spray corrosion test, hardness test, and abrasion test of nanomodified phosphate coatings
- 28 February 2026
- journal article
- Published by Sole Proprietor Company Klyueva M.M. in Construction Materials and Products
- Vol. 9 (1) , 3
Abstract
The development of new rust converter formulations is a relevant issue that contributes to increasing the competitive edge of domestic products and sustainable development of various branches of the economy. The aim of the study is to determine the corrosion resistance of various phosphate films on the metal surface when exposed to salt spray, as well as to determine hardness and resistance to abrasion (scratching). Materials and methods: Metal rods are coated with a film using a special surface treatment with orthophosphoricacid-based rust converters. The study introduces a new experimental rust converter formulation containing a Lewis acid (or its salts) and dispersed nanopowders of oxide and other inorganic/organic complexes. Results: Tests revealed that full-scale corrosion of metal rods treated with the experimental formulations began after 9 and 10 days, while untreated rods were showing signs of corrosion as early as on the second day. These films also demonstrated a hardness of 490 HV (modified scale of a TEMP-4 hardness tester) and withstood a maximum indenter load of 4.1 kg (measured with PROMTPP-1518) based on ISO 1518 method (scratching with a needle). Conclusions: Based on the test results, it was concluded that the modified phosphate films exhibit high hardness and resistance to needle scratching according to ISO 1518 method, and also exhibit increased corrosion resistance to salt spray. However, the demonstrated resistance is insufficient for exposure to a salt spray chamber for 42 days.Keywords
This publication has 24 references indexed in Scilit:
- Efflorescence inhibition and microstructure evolution of Portland cement-based artificial stone induced by mineral additivesCase Studies in Construction Materials, 2022
- Study on the corrosion change law and prediction model of cement stone in oil wells with CO2 corrosion in ultra-high-temperature acid gas wellsConstruction and Building Materials, 2022
- Analytical model of corrosion-induced cracks in concrete considering time-varying deformations of layers, mechanical properties of rustConstruction and Building Materials, 2022
- Structural behavior of RC beams strengthened with prestressed near surface mounted technique using basalt FRP barsEngineering Structures, 2022
- Research of strength capabilities of building steels under temperature effectsJournal of Physics: Conference Series, 2021
- A multi-layer approach to classify the risk of corrosion in concrete specimens that contain different additivesCase Studies in Construction Materials, 2021
- Numerical simulation and experiment on the coupled effects of macro-cell corrosion and multi-ion equilibrium with pseudo structural concreteCement and Concrete Composites, 2021
- Meso-scale modeling of concrete cracking induced by 3D corrosion expansion of helical strandsComputers & Structures, 2021
- Effect of carbon fiber waste on steel corrosion of reinforced concrete structures exposed to the marine environmentJournal of Cleaner Production, 2021
- Influence of Chloride-Containing Media on the Protective Properties of Concrete2020