Optimized reconstruction of the crystallographic orientation density function based on a reduced set of orientations
Open Access
- 1 February 2020
- journal article
- research article
- Published by International Union of Crystallography (IUCr) in Journal of Applied Crystallography
- Vol. 53 (1) , 178-187
Abstract
Crystallographic textures, as they develop for example during cold forming, can have a significant influence on the mechanical properties of metals, such as plastic anisotropy. Textures are typically characterized by a non-uniform distribution of crystallographic orientations that can be measured by diffraction experiments like electron backscatter diffraction (EBSD). Such experimental data usually contain a large number of data points, which must be significantly reduced to be used for numerical modeling. However, the challenge in such data reduction is to preserve the important characteristics of the experimental data, while reducing the volume and preserving the computational efficiency of the numerical model. For example, in micromechanical modeling, representative volume elements (RVEs) of the real microstructure are generated and the mechanical properties of these RVEs are studied by the crystal plasticity finite element method. In this work, a new method is developed for extracting a reduced set of orientations from EBSD data containing a large number of orientations. This approach is based on the established integer approximation method and it minimizes its shortcomings. Furthermore, the L 1 norm is applied as an error function; this is commonly used in texture analysis for quantitative assessment of the degree of approximation and can be used to control the convergence behavior. The method is tested on four experimental data sets to demonstrate its capabilities. This new method for the purposeful reduction of a set of orientations into equally weighted orientations is not only suitable for numerical simulation but also shows improvement in results in comparison with other available methods.Keywords
This publication has 18 references indexed in Scilit:
- Influence of Microstructural Features on the Strain Hardening Behavior of Additively Manufactured Metallic ComponentsAdvanced Engineering Materials, 2019
- Procedures for reducing large datasets of crystal orientations using generalized spherical harmonicsMechanics of Materials, 2015
- Kernel density estimation on the rotation group and its application to crystallographic texture analysisJournal of Multivariate Analysis, 2013
- Texture Analysis with MTEX – Free and Open Source Software ToolboxSolid State Phenomena, 2010
- Selecting a set of discrete orientations for accurate texture reconstructionComputational Materials Science, 2008
- Accuracy of orientation distribution function determination based on EBSD data‐A case study of a recrystallized low alloyed Zr sheetJournal of Microscopy, 2007
- Single-crystal elasto-viscoplasticity: application to texture evolution in polycrystalline metals at large strainsComputer Methods in Applied Mechanics and Engineering, 2004
- Characterisation of fine-scale microstructures by electron backscatter diffraction (EBSD)Scripta Materialia, 2004
- A six-component yield function for anisotropic materialsInternational Journal of Plasticity, 1991
- A theory of the yielding and plastic flow of anisotropic metalsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1948