COMPATIBILITY STUDY OF NBR/PVC BLEND WITH GASOLINES AND ETHANOL FUEL
- 1 June 2012
- journal article
- Published by Rubber Division, ACS in Rubber Chemistry and Technology
- Vol. 85 (2) , 195-206
Abstract
An NBR/polyvinyl chloride (PVC) blend changed by aging (20 weeks in different fuels at room temperature) was evaluated for weight, hardness, mechanical properties, and microstructure. The exposure tests were made with premium gasoline, regular gasoline, regular gasoline doped with a rubber solvent, and an oxygenated renewable biofuel (ethanol fuel). After the aging tests, all NBR/PVC blend samples increased in both hardness and elastic modulus, whereas both elongation at break and tension at break decreased, but in different proportions. As the NBR/PVC blends aged, they became less elastomeric and more rigid. The regular gasoline doped with a rubber solvent was the most aggressive of the fuels tested because it promoted the extraction of a large quantity of the blend constituents, thus making the blend harder. In general, NBR/PVC samples immersed in the fuels showed similar mechanical behaviors, except in the case of immersion in ethanol. The values of parameters τ3 and I3 were obtained by positron annihilation lifetime spectroscopy. The changes in the mechanical properties and the reduction of the values of parameters τ3 and I3 were related to extraction of the plasticizer, which was confirmed by thermogravimetric analysis.Keywords
This publication has 10 references indexed in Scilit:
- Degradation of physical properties of different elastomers upon exposure to palm biodieselEnergy, 2011
- Compatibility study of high density polyethylene with bioethanol–gasoline blendsMaterials & Design (1980-2015), 2011
- Mechanical and swelling properties of thermoplastic elastomer blendsMaterials & Design (1980-2015), 2009
- Study of Brazilian Gasoline Quality Using Hydrogen Nuclear Magnetic Resonance (1H NMR) Spectroscopy and ChemometricsEnergy & Fuels, 2008
- Specific consumption of liquid biofuels in gasoline fuelled enginesFuel, 2008
- Use of Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA) in Gas Chromatographic (GC) Data in the Investigation of Gasoline AdulterationEnergy & Fuels, 2007
- Surface analysis of NBR and HNBR elastomers modified with different plasma treatmentsVacuum, 2007
- Effect of Alcohol and Copper Content on the Stability of Automotive GasolineEnergy & Fuels, 2005
- Positron annihilation and differential scanning calorimetry studies of plasticized poly(ethylene oxide)Polymer, 2000
- A DMTA study of the fuel resistance of elastomersThermochimica Acta, 1993