Adhesive Bonding of Scots Pine Wood from the Szczecinek Forest District for the Production of Garden Equipment: An Experimental Investigation
Open Access
- 16 December 2022
- Vol. 15 (24) , 8994
Abstract
This work aimed to determine the gluability of pressure-impregnated pine wood with two protection agents used in production technologies for garden equipment and their effect on the strength, water resistance and thermal resistance of joints, as well as their susceptibility to aging. The tests were carried out on Scots pine wood (Pinus sylvestris L.) purchased from the forest districts of the Regional Directorate of State Forests in Szczecinek town, Poland. For the impregnation, two commercial protection agents were used. The pressure impregnation of the elements and gluing with the PUR adhesive were carried out by a garden furniture manufacturer. The strength and durability after aging tests of glued joints were performed in accordance with the procedure described in Technical Approval No. AT-15-2948/00 and the PN-EN ISO 9142 standard. The collected experimental data can be used in technological solutions, mainly for processes which involve gluing wood after impregnation.Keywords
Funding Information
- Polish Ministry of Science and Higher Education’s “Regional Initiative Excellence” program (005/RID/2018/19)
This publication has 26 references indexed in Scilit:
- Influence of Moisture Content on the Bond Strength and Water Resistance of Bonded Wood JointsBioResources, 2014
- Review of Recent Research Activities on One-Component PUR-Adhesives for Engineered Wood Products2014
- Bonding strength of oak with different adhesives after humid-water-heat testsJournal of Adhesion Science and Technology, 2013
- Influence of the chemical structure of PUR prepolymers on thermal stabilityInternational Journal of Adhesion and Adhesives, 2011
- Comparison of the compressive strength of impregnated and nonimpregnated eucalyptus subjected to two different pressures and impregnation timesMaterials Research, 2004
- Effect of Polyborate Pre-treatment on the Shear Strength Development of Phenolic Resin to Sitka Spruce BondsHolzforschung, 1993
- Combustion gas toxicity, hygroscopicity, and adhesive strength of plywood treated with flame retardantsWood Science and Technology, 1992
- Effect of excessive pretreatment of pine timber with CCA wood preservatives on the bond quality of PRF and TRF wood adhesivesEuropean Journal of Wood and Wood Products, 1985
- Beitrag zur Prüfung der Leimbindefestigkeit von schutzmittelgetränktem HolzEuropean Journal of Wood and Wood Products, 1983
- Scherfestigkeit der Klebverbindung von vorimprägniertem Holz—Beitrag zur Entwicklung wetterbeständigen BrettschichtholzesEuropean Journal of Wood and Wood Products, 1979