Effect of Freeze-Thaw Damage on the Physical, Mechanical, and Acoustic Behavior of Sandstone in Urumqi
Open Access
- 5 August 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (15) , 7870
Abstract
The Urumqi area in China is a seasonally cold region, and the rock structures in the region are susceptible to freeze-thaw (F-T) weathering. Therefore, this study investigated the effect of F-T on the physical, mechanical, and fracture behavior of sandstone from Urumqi. The acoustic emission method (AE) was used to determine the stress thresholds for the initiation and development of cracks in the samples under cyclic F-T action. The results suggested that parameters such as P-wave velocity, elastic modulus, and peak stress presented a significant negative correlation with F-T damage, while porosity exhibited a close positive correlation. The elastic modulus of the sample was more sensitive to the F-T action with the smallest half-life (27 cycles) and the largest decay factor (0.0254). In addition, the stress threshold for micro-cracks development and macro-cracks initiation in the samples decreased with increasing F-T damage. After 30 F-T cycles, the stress threshold for micro-cracks propagation in the samples decreased from 20.73 MPa to 5.02 MPa by approximately 76%. The normalized stress threshold for the macro-cracks initiation was also decreased from 0.93 to 0.71. Moreover, the macro-cracks damage zone of the samples showed an increasing trend with F-T damage, from 7% under natural conditions to 29% after 30 cycles. It is concluded that F-T action lowers the stress thresholds for cracks development in sandstone in the Urumqi area, posing serious safety concerns for mass rock engineering in this area.Keywords
Funding Information
- National Natural Science Foundation of China (No. 51974296, No. 52061135111)
This publication has 36 references indexed in Scilit:
- A model for characterizing crack closure effect of rocksEngineering Geology, 2015
- Influence of wet–dry, freeze–thaw, and heat–cool cycles on the physical and mechanical properties of Upper Red sandstones in central IranBulletin of Engineering Geology and the Environment, 2014
- Effect of freeze–thaw process on the abrasion loss value of stonesInternational Journal of Rock Mechanics and Mining Sciences, 2010
- Why Do Freezing Rocks Break?Science, 2006
- Characterisation of fractured rocks under uniaxial loading statesInternational Journal of Rock Mechanics and Mining Sciences, 2004
- Study on the damage propagation of surrounding rock from a cold-region tunnel under freeze–thaw cycle conditionTunnelling and Underground Space Technology, 2004
- Effect of water saturation on deterioration of welded tuff due to freeze-thaw actionCold Regions Science and Technology, 2004
- Compaction localization in porous sandstones: spatial evolution of damage and acoustic emission activityJournal of Structural Geology, 2004
- A decay function model for the integrity loss of rock when subjected to recurrent cycles of freezing–thawing and heating–coolingInternational Journal of Rock Mechanics and Mining Sciences, 2004
- Determination of some thermo-mechanical properties of Sirahama sandstone under subzero temperature conditionInternational Journal of Rock Mechanics and Mining Sciences, 2001