Optimum Mix Design for Internally Integrated Concrete with Crystallizing Protective Material
- 1 July 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (7)
Abstract
In this research, a silica-based crystallizing protective material was integrated into a fresh concrete mix to evaluate its efficacy in reducing water absorption while preserving the compressive strength level of the mixture. An optimum concrete mix design was determined, by producing several concrete mixes with different water-to-cement ratios (w/c) of 0.32, 0.37, 0.40, and 0.46, and treated with 2% and 4% of the crystallizing admixture. Water absorption and the mechanical properties of the treated and control mixes were measured, using the initial surface absorption test (ISAT) and the compressive strength and the flexural strength tests, respectively. Results showed that it is possible to obtain a water-resistant concrete without compromising its compressive strength if the right w/c ratio was used and the proper dosage of the crystallizing material was added. In addition, results revealed that treatment is beneficial only in the case of producing concrete with low w/c ratios of 0.32 and 0.37 and treated with crystallizing material. The compressive strength can increase up to 42% and with a significant drop in water absorption reaches 65%. Treated concrete was analyzed thoroughly under the scanning electron microscope (SEM) and X-ray diffraction (XRD) instrument to show the development of crystals with time and their interaction with the concrete mix.Keywords
This publication has 20 references indexed in Scilit:
- Remediation and protection of masonry structures with crystallising moisture blocking treatmentInternational Journal of Building Pathology and Adaptation, 2018
- Development of hydrophobic concrete by adding dual‐crystalline admixture at mixing stageStructural Concrete, 2018
- A novel approach of introducing crystalline protection material and curing agent in fresh concrete for enhancing hydrophobicityConstruction and Building Materials, 2018
- Influence of early water exposure on modified cementitious coatingConstruction and Building Materials, 2017
- Experimental Investigation on Pore Structure Characterization of Concrete Exposed to Water and ChloridesMaterials, 2014
- Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concreteConstruction and Building Materials, 2014
- Investigation of the effects of fatty acids on the compressive strength of the concrete and the grindability of the cementCement and Concrete Research, 2005
- Porosity, pore size distribution and in situ strength of concreteCement and Concrete Research, 2003
- Use of Surface Treatment Materials to Improve Concrete DurabilityJournal of Materials in Civil Engineering, 1999
- Protection provided by surface treatments against chloride induced corrosionMaterials and Structures, 1998