High work function metal oxides for the hole contact of silicon solar Cells
Authors:
- 21 November 2016
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 0215-0220
Abstract
The applicability of molybdenum, tungsten and vanadium oxide as a hole contact for silicon wafer based solar cells is explored. The Si heterojunctions for which these materials are in direct contact with the c-Si absorber, featuring an additional a-Si:H passivation layer or where these materials are used as an additional contact layer in-between the TCO / a-Si:H(p) Schottky contact are addressed. Compared to the standard TCO / a-Si:H(p) / a-Si:H(i) / c-Si heterojunction an efficiency (1 %abs) and fill factor gain (1.5 %abs) is obtained if a-Si:H(p) is replaced by molybdenum and if tungsten oxide is applied as an additional contact layer at the TCO / a-Si:H(p) contact. For the simple structure without intrinsic and doped a-Si:H and tungsten or vanadium oxide in direct contact to the c-Si absorber, efficiencies comparable to the reference were obtained.Keywords
This publication has 19 references indexed in Scilit:
- Atomic Layer Deposited Molybdenum Oxide for the Hole-selective Contact of Silicon Solar CellsEnergy Procedia, 2016
- Molybdenum and tungsten oxide: High work function wide band gap contact materials for hole selective contacts of silicon solar cellsSolar Energy Materials and Solar Cells, 2015
- 22.5% efficient silicon heterojunction solar cell with molybdenum oxide hole collectorApplied Physics Letters, 2015
- Molybdenum oxide MoOx: A versatile hole contact for silicon solar cellsApplied Physics Letters, 2014
- TCO work function related transport losses at the a-Si:H/TCO-contact in SHJ solar cellsSolar Energy Materials and Solar Cells, 2014
- Achievement of More Than 25% Conversion Efficiency With Crystalline Silicon Heterojunction Solar CellIEEE Journal of Photovoltaics, 2014
- Hole Selective MoOx Contact for Silicon Solar CellsNano Letters, 2014
- Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfacesNPG Asia Materials, 2013
- Towards a high efficiency amorphous silicon solar cell using molybdenum oxide as a window layer instead of conventional p-type amorphous silicon carbideApplied Physics Letters, 2011
- Determination of surface properties by means of large signal photovoltage pulses and the influence of trappingSurface Science, 1974