A Methodology for Cycle-By-Cycle Transient Heat Release Analysis in a Turbocharged Direct Injection Diesel Engine
Authors:
- 6 March 2000
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This study presents a systematic methodology for performing transient heat release analysis in a diesel engine. Novel techniques have been developed to infer the mass of air trapped in the cylinder and the mass of fuel injected on a cycle-by-cycle basis. The cyclic mass of air trapped in the cylinder is found accounting for pressure gradients, piston motion and short-circuiting during the valve overlap period. The cyclic mass of fuel injected is computed from the injection pressure history. These parameters are used in conjunction with cycle-resolved pressure data to accurately define the instantaneous thermodynamic state of the mixture. This information is used in the calculation and interpretation of transient heat release profiles. Results presented for a step-change in load illustrate how cyclic pressure measurements, along with fuel and air computations, can aid in understanding the effects of mixture preparation on the character and rate of combustion during diesel engine transients.Keywords
This publication has 25 references indexed in Scilit:
- Dynamic Behaviour of a High Speed Direct Injection Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1999
- Investigation of Cavitation in a Vertical Multi-Hole InjectorSAE International Journal of Advances and Current Practices in Mobility, 1999
- The Effects of Diesel Fuel Properties and Engine Operating Conditions on Ignition DelaySAE International Journal of Advances and Current Practices in Mobility, 1982
- A Combustion Correlation for Diesel Engine SimulationSAE International Journal of Advances and Current Practices in Mobility, 1980
- Study on the Cycle-by-Cycle Variation in Diesel EnginesBulletin of JSME, 1977
- Measurement and Analysis of Engine Pressure DataSAE International Journal of Advances and Current Practices in Mobility, 1975
- The Effects of Physical Factors on Ignition DelaySAE International Journal of Advances and Current Practices in Mobility, 1968
- A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion EngineSAE International Journal of Advances and Current Practices in Mobility, 1967
- Pressure Waves Accompanying Detonation in the Internal Combustion EngineJournal of the Aeronautical Sciences, 1938
- Motion Pictures of Engine Flames Correlated with Pressure CardsSAE International Journal of Advances and Current Practices in Mobility, 1938