Design, Fabrication, and Characterization of a Laser-Controlled Explosion-Initiating Device with Integrated Safe-and-Arm, EMP-Resistant, and Fast-Acting Technology Based on Photovoltaic Power Converter
Open Access
- 30 April 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (5) , 728
Abstract
To augment the intelligence and safety of a rocket or ammunition engine start, an intelligent initiation system needs to be included in the data link. A laser-controlled intelligent initiation system with inherent safety and a laser-controlled explosion-initiating device (LCEID) incorporating electromagnetic pulse (EMP) resistant, safe-and-arms fast-acting modular device based on photovoltaic power converter technology is designed and fabricated in this work. LCEID is an integrated multi-function module consisting of the optical beam expander, GaAs photovoltaic (PV) array, safe-and-arms integrated circuit, and low-energy initiator. These components contribute to EMP resistance, fast-acting, safe-and-arm, and reliable firing, respectively. To achieve intelligent initiation, each LCEID has a unique “identification information” and a “broadcast address” embedded in integrated-circuit read-only memory (ROM), which is controlled by encoded laser addressing. The GaAs PV array was investigated to meet the low-energy initiator firing voltage requirements. Experimental results show that the open-circuit voltage, short-circuit current, and maximum power output of the four-junction GaAs PV array illuminated by a 5.5 W/cm2 laser beam were 220 mA, 21.5 V, and 3.70 W, respectively. When the voltage of the 22 μF energy storage capacitor exceeds 20 V, the laser charging time is found to be shorter than 2.5 s. Other aspects of LCEID, such as laser energy coupling efficiency, the firing process, and the energy-boosting mechanism, were explored. Measurements show that the coupling efficiency of the micro lens with a radius of curvature D = 20 μm and size of r = 50 μm reaches a maximum of 93.5%. Furthermore, for more than 18 V charge voltage, the LCEID is found to perform reliably. The fabricated LCEID demonstrated a high level of integration and intrinsic safety, as well as a finely tailored initiation performance that could be useful in military applications.Keywords
Funding Information
- foundation of the key research development program of Shaanxi (2020GY-020)
This publication has 17 references indexed in Scilit:
- Experimental study of structural and optical properties of integrated MOCVD GaAs/Si(001) heterostructuresPhysica B: Condensed Matter, 2018
- High-photovoltage GaAs vertical epitaxial monolithic heterostructures with 20 thin p/n junctions and a conversion efficiency of 60%Applied Physics Letters, 2016
- Photovoltaic laser-power converter based on AlGaAs/GaAs heterostructuresSemiconductors, 2016
- Distinctions of the growth and structural-spectroscopic investigations of thin AlN films grown on the GaAs substratesPhysica B: Condensed Matter, 2016
- Energetic semiconductor bridge device incorporating Al/MoOx multilayer nanofilms and negative temperature coefficient thermistor chipJournal of Applied Physics, 2014
- Micro-chip initiator realized by integrating Al/CuO multilayer nanothermite on polymeric membraneJournal of Micromechanics and Microengineering, 2013
- Photovoltaic Module Modeling using Simulink/MatlabProcedia Environmental Sciences, 2013
- EMC Protection of SCB Explosive Devices by Using SMD-Based NTC ThermistorsIEEE Transactions on Electromagnetic Compatibility, 2012
- A new method of determination of series and shunt resistances of silicon solar cellsSolar Energy Materials and Solar Cells, 2007
- Characteristics of plasma generated by polysilicon semiconductor bridge (SCB)Sensors and Actuators A: Physical, 2002