Fatigue Performance and Model of Polyacrylonitrile Fiber Reinforced Asphalt Mixture
Open Access
- 3 October 2018
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 8 (10) , 1818
Abstract
Fatigue is considered a major pavement structural distress and an important part of a performance-based mix design. Currently, the fatigue model of asphalt mixture, especially the mixture incorporated with fibers, is not perfect. In this paper, the central-point bending fatigue test was conducted by constant strain mode with MTS apparatus. The fatigue performance and model of polyacrylonitrile (PAN) fiber-reinforced asphalt mixture produced with different fiber contents and asphalt contents were reported. The results indicated that the fatigue life of fiber reinforced mixture was higher than the reference one. The effects of fiber contents and asphalt contents on fatigue life were discussed. The mechanism of an optimum fiber content for the fatigue life in the fiber reinforced asphalt mixture was explained. The statistical analysis of variance (ANOVA) method and regression method were used to evaluate the effects of fiber content, strain level, and volumetric parameters, etc. on the fatigue life of an asphalt mixture. This paper presents a new fatigue performance model of a PAN fiber-reinforced asphalt mixture, including the fiber content, tensile strain, mixture initial flexural stiffness, and voids filled with asphalt (VFA). Compared to the earlier fatigue equations, the accuracy of the new fatigue model with the fiber content is improved significantly according to the statistical analysis results. Meanwhile, the model can preferably reveal the effect of fiber content, strain level, initial stiffness, and VFA on fatigue life.Keywords
Funding Information
- National Natural Science Foundation of China (51478052)
- Hunan Transportation Department (201302)
- Guangdong Transportation Department (2013-01-002)
This publication has 15 references indexed in Scilit:
- Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST testsConstruction and Building Materials, 2018
- Improvement of asphalt mixture performance with glass macro-fibersConstruction and Building Materials, 2018
- Experimental evaluation of the basalt fibers and diatomite powder compound on enhanced fatigue life and tensile strength of hot mix asphalt at low temperaturesConstruction and Building Materials, 2017
- Effects of phosphorus slag powder and polyester fiber on performance characteristics of asphalt binders and resultant mixturesConstruction and Building Materials, 2017
- Evaluating the fatigue properties of hot mix asphalt reinforced by recycled PET fibers using 4-point bending testConstruction and Building Materials, 2017
- Glass fiber reinforced asphalt membrane for interlayer bonding between asphalt overlay and concrete pavementConstruction and Building Materials, 2015
- Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixtureMaterials & Design (1980-2015), 2015
- Assessment of Fatigue Resistance of Additivated Asphalt Concrete Incorporating Fibers and PolymersJournal of Materials in Civil Engineering, 2014
- Experimental study of fibers in stabilizing and reinforcing asphalt binderFuel, 2010
- Fatigue Characteristics of Superpave and Hveem MixturesJournal of Transportation Engineering, 2005