Structure and electrochemical properties of Sm-doped Li4Ti5O12 as anode material for lithium-ion batteries
- 21 January 2016
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (19) , 15492-15500
Abstract
Sm-doped Li4Ti5O12 (LTO) in the form of Li4−x/3Ti5−2x/3SmxO12 (x = 0, 0.01, 0.03, 0.05 and 0.10) is synthesized successfully by a simple solid-state reaction in air. XRD analysis and Rietveld refinement demonstrate that traces of the doped Sm3+ ions have successfully entered the lattice structure of the bulk LTO and the Sm doping does not change the spinel structure of LTO. However, of interest is that the lattice parameter increases gradually with the increase of the Sm doping amount, which is potentially beneficial for intercalation and de-intercalation of lithium ions. XPS results further identify the existence of Ti3+ ions and the transition of a small quantity of Ti ions from Ti4+ to Ti3+, which will improve the conductivity of LTO. All materials are well crystallized with a uniform and narrow size distribution in the range of 0.5–1.2 μm. The results of electrochemical measurement reveal that the Sm doping can improve the rate capability and cycling stability of LTO. Among all samples, Li4−x/3Ti5−2x/3SmxO12 (x = 0.03) exhibits the best electrochemical properties. The specific capacities of the Li4−x/3Ti5−2x/3SmxO12 (x = 0.03) sample at charge and discharge rates of 5C and 10C are 131.1 mA h g−1 and 119.2 mA h g−1, respectively, compared with 64 mA h g−1 (5C) and 47 mA h g−1 (10C) for the pristine LTO in the potential range 1.0–2.5 V (vs. Li/Li+). This result can be attributed to Li4−x/3Ti5−2x/3SmxO12 (x = 0.03) with a diffusion coefficient of 1.3 × 10−12 cm2 s−1, which is higher than the 7.4 × 10−14 cm2 s−1 for the LTO electrode without Sm doping. In the meantime, the discharge capacity of Li4−x/3Ti5−2x/3SmxO12 (x = 0.03) can still reach 125.1 mA h g−1 even after 100 cycles and maintain 95.2% of its initial discharge capacity at 5C. Therefore, Sm doping has a great impact on discharge capacity, rate capability and cycling performance of LTO anode materials for lithium-ion batteries.Keywords
This publication has 34 references indexed in Scilit:
- Recent advances of Li4Ti5O12 as a promising next generation anode material for high power lithium-ion batteriesJournal of Materials Chemistry A, 2015
- Effect of rigidity of porous structure on electrochemical behavior of pristine Li4Ti5O12 microspheresElectrochimica Acta, 2015
- Mesoporous cobalt monoxide nanorods grown on reduced graphene oxide nanosheets with high lithium storage performanceElectrochimica Acta, 2014
- Green and Facile Fabrication of Hollow Porous MnO/C Microspheres from Microalgaes for Lithium-Ion BatteriesACS Nano, 2013
- Highly Stable Metal Mono-Oxide Alloy Nanoparticles and Their Potential as Anode Materials for Li-Ion BatteryThe Journal of Physical Chemistry C, 2012
- Nanostructured Anode Material for High‐Power Battery System in Electric VehiclesAdvanced Materials, 2010
- Solution-Combustion Synthesized Nanocrystalline Li4Ti5O12 As High-Rate Performance Li-Ion Battery AnodeChemistry of Materials, 2010
- Ab initio studies of structural and electronic properties of Li4Ti5O12 spinelElectrochemistry Communications, 2007
- Issues and challenges facing rechargeable lithium batteriesNature, 2001
- Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium CellsJournal of the Electrochemical Society, 1995