Fatty acid‐based comonomers as styrene replacements in soybean and castor oil‐based thermosetting polymers
Authors:
- 30 July 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 119 (2) , 1000-1010
Abstract
In this study, a fatty acid‐based comonomer is employed as a styrene replacement for the production of triglyceride‐based thermosetting resins. Styrene is a hazardous pollutant and a volatile organic compound. Given their low volatility, fatty acid monomers, such as methacrylated lauric acid (MLA), are attractive alternatives in reducing or eliminating styrene usage. Different triglyceride‐derived cross‐linkers resins were produced for this purpose: acrylated epoxidized soybean oil (AESO), maleinated AESO (MAESO), maleinated soybean oil monoglyceride (SOMG/MA) and maleinated castor oil monoglyceride (COMG/MA). The mechanical properties of the bio‐based polymers and the viscosities of bio‐based resins were analyzed. The viscosities of the resins using MLA were higher than that of resins with styrene. Decreasing the content of MLA increased the glass transition temperature (Tg). In fact, the Tg of bio‐based resin/MLA polymers were on the order of 60°C, which was significantly lower than the bio‐based resin/styrene polymers. Ternary blends of SOMG/MA and COMG/MA with MLA and styrene improved the mechanical properties and reduced the resin viscosity to acceptable values. Lastly, butyrated kraft lignin was incorporated into the bio‐based resins, ultimately leading to improved mechanical properties of this thermoset but with unacceptable increases in viscosity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011Keywords
This publication has 29 references indexed in Scilit:
- The synthesis of 9–10 Dibromo stearic acid glycidyl methacrylate and its use in vinyl ester resinsJournal of Applied Polymer Science, 2007
- DSC study on the effect of cure reagents on the lignin base epoxy cure reactionJournal of Applied Polymer Science, 2007
- The use of bimodal blends of vinyl ester monomers to improve resin processing and toughen polymer propertiesPolymer, 2005
- Property analysis of triglyceride-based thermosetsPolymer, 2005
- New sheet molding compound resins from soybean oil. I. Synthesis and characterizationPolymer, 2005
- Fatty acid-based monomers as styrene replacements for liquid molding resinsPolymer, 2004
- Rapid simultaneous determination by proton NMR of unsaturation and composition of acyl groups in vegetable oilsEuropean Journal of Lipid Science and Technology, 2003
- Castor‐acrylated monomer 1H‐ and 13C‐nuclear magnetic resonance spectral assignmentsJournal of Applied Polymer Science, 2001
- Rigid, thermosetting liquid molding resins from renewable resources. I. Synthesis and polymerization of soy oil monoglyceride maleatesJournal of Applied Polymer Science, 2001
- N.m.r. study of maleate (cis)—fumarate (trans) isomerism in unsaturated polyesters and related compoundsPolymer, 1995