Influence of design on dispersive mixing performance in an axial discharge continuous mixer—LCMAX 40
Authors:
- 1 June 1998
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 38 (6) , 936-946
Abstract
The axial discharge continuous mixer combines the features of a continuous mixer and a twin screw extruder, expanding the flexibility of this compounding machine. In this work we analyzed the influence of rotor design on the dispersive mixing performance of a LCMAX 40 unit. Specifically we looked at various arrangements for the pushing and counter pushing units in the design of the LCMAX 40. A fluid dynamics analysis package—FIDAP, based on the finite element method, was used to model the flow behavior of a power law model fluid under different pressurization conditions. Dispersive mixing efficiency was quantified in terms of shear stresses and elongational flow components generated in the flow field. We found that the counter‐pushing unit generally contributes more in building up high shear stresses. However, the generation of elongational flow components, which is beneficial for dispersive mixing, is not solely dependent upon the pushing–counter pushing configuration but rather on the overall rotor geometry. We found that the maximum number of counter‐pushing units in the rotor design of the LCMAX 40 should not exceed two in order to provide adequate material pumping. Rotor designs with alternating arrangements of pushing and counter‐pushing units provide overall better dispersive mixing conditions.Keywords
This publication has 17 references indexed in Scilit:
- Influence of Design on Mixing Efficiency in a Variable Intermeshing Clearance MixerInternational Polymer Processing, 1997
- Modeling and Experimental Study of the Flow in a Simplified Cavity Transfer MixerInternational Polymer Processing, 1996
- Flow field analysis of an intermeshing counterrotating twin screw extruderPolymer Engineering & Science, 1994
- 3-D Flow Simulations of a Cavity Transfer MixerInternational Polymer Processing, 1994
- Flow field analysis of the kneading disc region in a co‐rotating twin screw extruderPolymer Engineering & Science, 1992
- 3D Flow Field Analysis of a Banbury MixerInternational Polymer Processing, 1992
- Flow Field Characterization in a Banbury MixerInternational Polymer Processing, 1990
- Hydrodynamic analysis of a banbury mixer 2‐D flow simulations for the entire mixing chamberPolymer Engineering & Science, 1989
- Hydrodynamic analysis of a Banbury mixerPolymer Engineering & Science, 1989
- Particle motions in sheared suspensions XII. Deformation and burst of fluid drops in shear and hyperbolic flowJournal of Colloid Science, 1961