HTS Dipole Insert Developments
Authors:
- 4 January 2013
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 23 (3) , 4601004
Abstract
Future accelerator magnets will need to reach a magnetic field in the 20 T range. Reaching such a magnetic field is a challenge only reachable using high temperature superconductor (HTS) material. The high current densities and stress levels needed to satisfy the design criterion of such magnets make YBaCuO superconductor the most appropriate candidate especially when produced using the IBAD route. The HFM EUCARD program is aimed at designing and manufacturing a dipole insert made of HTS material generating 6 T inside a Nb3Sn dipole of 13 T at 4.2 K. In the HTS insert, engineering current densities higher than 250 MA/m2 under 19 T are required to reach the performances. The stress level is consequently very high. The insert protection is also a critical issue as HTS shows low quench propagation velocity. The coupling with the Nb3Sn dipole makes the problem even more difficult. The magnetic and mechanical designs of the HTS insert will be presented as well as the technological developments underway to realize this compact dipole insert.Keywords
This publication has 6 references indexed in Scilit:
- Development of the EuCARD $\hbox{Nb}_{3}\hbox{Sn}$ Dipole Magnet FRESCA2IEEE Transactions on Applied Superconductivity, 2013
- Characterization of YBCO Coated Conductors Under High Magnetic Field at LNCMIIEEE Transactions on Applied Superconductivity, 2011
- HTS Insert Magnet Design StudyIEEE Transactions on Applied Superconductivity, 2011
- Benchmark of Two Quench Codes for the Protection Study of an High Field HTS Insert DipoleIEEE Transactions on Applied Superconductivity, 2010
- Degradation of the performance of a YBCO-coated conductor double pancake coil due to epoxy impregnationPhysica C: Superconductivity and its Applications, 2010
- Materials at Low TemperaturesPhysics Today, 1984