Design of low-loss 1-3 piezoelectric composites for high-power transducer applications
Authors:
- 20 September 2012
- journal article
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 59 (9) , 1969-1975
Abstract
Lead zirconate titanate (PZT)/polymer 1-3 composites have improved electromechanical properties compared with monolithic counterparts, but possess a low mechanical quality factor, limiting their use in high-power transducer applications. The goal of this work was to improve the mechanical quality factor of 1-3 PZT/polymer composites by optimizing the polymer materials. Theoretical analysis and modeling were performed for optimum composite design and various polymers were prepared and characterized. 1-3 piezocomposites were constructed and their electromechanical properties were experimentally determined. The results demonstrated that the composites with high-thermal-conductivity polymers generally have degraded electromechanical properties with significantly decreased mechanical quality factors, whereas the composites filled with low-loss and low-moduli polymers were found to have higher mechanical quality factors with higher electromechanical coupling factors: Q m ~ 200 and k t ~ 0.68 for PZT4 composites; Q m ~ 400 and k t ~ 0.6 for PZT8 composites. The improved mechanical quality factor of 1-3 piezocomposites may offer improved performance and thermal stability of transducers under high-drive operation.Keywords
This publication has 19 references indexed in Scilit:
- Imaging arrays with improved transmit power capabilityIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2010
- Development of a portable therapeutic and high intensity ultrasound system for military, medical, and research useReview of Scientific Instruments, 2008
- Thermal conductivity of ceramic particle filled polymer composites and theoretical predictionsJournal of Materials Science, 2007
- Resonance modes and losses in 1-3 piezocomposites for ultrasonic transducer applicationsJournal of Applied Physics, 1999
- High Power Characterization of Piezoelectric MaterialsJournal of Electroceramics, 1998
- Piezoelectric Composite Materials for Ultrasonic Transducer Applications. Part I: Resonant Modes of Vibration of PZT Rod-Polymer CompositesIEEE Transactions on Sonics and Ultrasonics, 1985
- Tailoring the Properties of Composite Piezoelectric Materials for Medical Ultrasonic Transducers1985
- Fundamental Concepts in Acoustic Transducer Array Design1980
- Underwater Sound - A Review I. Underwater Sound TransducersIEEE Transactions on Sonics and Ultrasonics, 1975
- Resonant Frequencies of Finite Piezoelectric Ceramic Vibrators with High Electromechanical CouplingIEEE Transactions on Ultrasonics Engineering, 1963