Sensor-Assisted Assessment of the Tribological Behavior Patterns of AA7075 Hybrid MMC Reinforced with Multi-Wall Carbon Nanotubes and Pulverized Fuel Ash
Open Access
Abstract
In recent years, the deployment of sensors and other ancillary technologies has turned out to be vital in the investigation of tribological behavioral patterns of composites. The tribological behavioral patterns of AA7075 hybrid metal matrix composites (MMCs) reinforced with multi-wall carbon nanotubes (MWCNTs), and pulverized fuel ash (PFA) were investigated in this work. The stir casting technique was used to fabricate the composites. The mechanical properties such as tensile strength and hardness were determined for the fabricated material. Besides, microstructure analysis was performed for these AA7075 hybrid MMCs reinforced with MWCNTs and pulverized fuel ash. A pin-on-disc wear testing setup was used to evaluate the wear rate, in which the EN 31 steel disc was used as the counter-face. Taguchi’s design of the experiments was used to optimize the input parameters that impact the characteristics of the hybrid composites, and ANOVA (analysis of variance) was used to determine the contribution of input parameters on the wear behavior. Electrical discharge machining (EDM) was conducted on the AA7075 hybrid metal matrix composites using a copper electrode for determining the material removal rate. These investigations and the results were utilized for determining the optimized output process parameter values of the AA7075 metal matrix composite.Keywords
Funding Information
- Ministry of Science and Technology, Taiwan (MOST 108-2622-E-197-001-CC2, MOST 108-2221-E-197-027, MOST 108-3116-F-024-001-CC2)
This publication has 29 references indexed in Scilit:
- Tribology of Natural Fibers Composite Materials: An OverviewLubricants, 2020
- Effect of Adhesion on Mechanical and Tribological Properties of Glass Fiber Composites, Based on Ultra-High Molecular Weight Polyethylene Powders with Various Initial Particle SizesMaterials, 2020
- Experimental Investigation of Hybrid Carbon Nanotubes and Graphite Nanoplatelets on Rheology, Shrinkage, Mechanical, and Microstructure of SCCMMaterials, 2020
- Analysis and Comparative Assessment of Basic Tribological Properties of Selected Polymer CompositesMaterials, 2019
- A Comparative Study of Friction and Wear Processes of Model Metallic Biomaterials Including Registration of Friction-Induced Temperature Response of a Tribological PairMaterials, 2019
- Sensor-Assisted Assessment of the Tribological Behavioral Patterns of Al–SiCp Composites under Various Environmental Temperature ConditionsMaterials, 2019
- Effect of Different Raw Material Property for the Fabrication on Al/CNT Nanocomposite Using a Ball Mill with a Discrete Element Method (DEM) SimulationMaterials, 2019
- Fabrication methods of particulate reinforced Aluminium metal matrix composite-A reviewMaterials Today: Proceedings, 2018
- Determination of Abrasive Wear Behaviour of Al-Fly ash Metal Matrix Composites Produced by Squeeze CastingMaterials Today: Proceedings, 2018
- Effect of flyash particles with aluminium melt on the wear of aluminium metal matrix compositesEngineering Science and Technology, an International Journal, 2017