Design of High Voltage, High Power and High Frequency Transformer in LCC Resonant Converter
Authors:
- 1 February 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10482334,p. 1034-1038
Abstract
The design of a high voltage, high power and high frequency transformer is introduced considering its operation in the LCC resonant converter. The leakage inductance and winding capacitance of the transformer are used as the resonant elements. An additional series resonant capacitor is added to form the LCC topology. The discontinuous current mode (DCM) is adopted to achieve the ZCS turn-on and ZVZCS turn-off of the power switches. Smaller value of the winding capacitance is preferred because it has the effect of decreasing the peak value of the resonant current at almost the same output voltage. The theoretic calculation of the winding capacitance and leakage inductance of the transformer is given. The error between the theoretical calculation and practical measurement is within 15%. So optimization design of the parasitic resonant elements can be achieved to meet requirement of the circuit. A prototype of LCC resonant converter with 60 kW and 60 kV output is built based on the designed transformer. Experiment results are given.Keywords
This publication has 10 references indexed in Scilit:
- Self-Capacitance of High-Voltage TransformersIEEE Transactions on Power Electronics, 2007
- Using transformer parasitics for resonant converters - a review of the calculation of the stray capacitance of transformers2005
- A High Power Density, High Voltage Power Supply For A Pulsed Radar System2005
- Application of Different Types of High-Voltage Supplies on Industrial Electrostatic PrecipitatorsIEEE Transactions on Industry Applications, 2004
- Transformer and Inductor Design Handbook2004
- A new topology for high voltage, high frequency transformers2002
- A novel prototype design for a transformer for high voltage, high frequency, high power useIEEE Transactions on Power Delivery, 2001
- A capacitor-charging power supply using a series-resonant topology, constant on-time/variable frequency control, and zero-current switchingIEEE Transactions on Industrial Electronics, 1991
- Analysis and design of a series-parallel resonant converter with capacitive output filterIEEE Transactions on Industry Applications, 1991
- Comparison of resonant topologies in high-voltage DC applicationsIEEE Transactions on Aerospace and Electronic Systems, 1988