Effect of wetting-step line geometry on bubble growth and detachment
- 1 August 2026
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (8)
Abstract
Bubble growth and detachment under circular and regular polygonal wetting-step line (WSL) constraints, where a WSL denotes the boundary between superhydrophilic and superhydrophobic regions, were investigated experimentally at identical contact-line perimeters and circularities from 0.60 to 1.00. Synchronized dual-view imaging showed that decreasing circularity progressively increased the discrepancy between the two characteristic bubble profiles and strengthened the spatial anisotropy of the apparent contact angle. During quasi-static growth, non-circular WSLs produced a faster reduction in the Laplace pressure ratio between the bubble base and apex, leading to earlier necking and detachment. The plateau-averaged apparent contact-angle difference increased approximately linearly as circularity decreased. An effective capillary-retention coefficient calculated from the measured apparent contact angles increased from approximately 0.86 for the triangular WSL to 0.94 for the circular WSL, and was empirically correlated with circularity. A quasi-static force-balance model linked this coefficient to the normalized detachment volume. The measured normalized detachment volume increased from approximately 0.62 at a circularity of 0.60 to approximately 0.90 at a circularity of 1.00, with a linear regression coefficient of determination of 0.991. The circular result was close to previously reported axisymmetric WSL data. These results show that reduced circularity redistributes interfacial curvature and apparent contact angle, reduces the net vertical capillary-retention force, and causes bubble detachment at a smaller volume under equal-perimeter constraints.Keywords
Funding Information
- National Natural Science Foundation of China (12225202)
- Fundamental and Interdisciplinary Disciplines Breakthrough Plan of the Ministry of Education of China (JYB2025XDXM206)
- China Postdoctoral Science Foundation (2025M784270)
- Fundamental Research Funds for the Central Universities
This publication has 40 references indexed in Scilit:
- A review on the research progress of turbulent drag reduction and gas layer stability on superhydrophobic surfacesJournal of Hydrodynamics, 2025
- Enhancing Resistance to Wetting Transition through the Concave StructuresAdvanced Materials, 2024
- Study on the construction of durable superhydrophobic coatings using simple spray coating method and their underwater drag reduction performanceColloids and Surfaces A: Physicochemical and Engineering Aspects, 2024
- Droplet and bubble wetting behaviors: The roles of surface wettability and roughnessColloids and Surfaces A: Physicochemical and Engineering Aspects, 2022
- Utilisation of oxygen from water electrolysis – Assessment for wastewater treatment and aquacultureChemical Engineering Science, 2021
- Superhydrophobic drag reduction in turbulent flows: a critical reviewExperiments in Fluids, 2021
- Influence of wetting conditions on bubble formation from a submerged orificeExperiments in Fluids, 2020
- Experimental investigation of flow past a circular cylinder with hydrophobic coatingJournal of Hydrodynamics, 2018
- Effect of wetting conditions and flow rate on bubble formation at orifices submerged in waterColloids and Surfaces A: Physicochemical and Engineering Aspects, 2006
- Vapor bubble departure in forced convection boilingInternational Journal of Heat and Mass Transfer, 1993