Design and Verification of 150-krpm PMSM Based on Experiment Results of Prototype
Authors:
- 9 March 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 62 (12) , 7827-7836
Abstract
This paper proposes the design process of a 2.62-kW 150-krpm high-speed surface-mounted permanent-magnet synchronous motor. To meet the required specifications, the numbers of poles and slots were determined by considering the maximum speed and the rotary stability affected by the vibration of the rotor. In addition, this paper describes not only the appropriate material selection method but also the appropriate geometry design method based on analytic approaches. Furthermore, to precisely evaluate the bearing and windage losses at a high speed, a method that combines the finite-element method and the experiment results of the prototype was used. As a result, an improved motor was designed, which had higher maximum power and speed than the prototype and a lower mass moment of inertia. Finally, tests were conducted to verify the validity of the proposed design process and the effectiveness of the motor.Keywords
Funding Information
- MKE(The Ministry of Knowledge Economy), Korea (NIPA-2013-H0401-13-1008)
- NIPA(National IT Industry Promotion Agency)
This publication has 21 references indexed in Scilit:
- Analytical Approach for Mechanical Resonance Frequencies of High-Speed MachinesIEEE Transactions on Industrial Electronics, 2013
- Performance Characteristics of a High-Speed Energy-Saving Induction Motor With an Amorphous Stator CoreIEEE Transactions on Industrial Electronics, 2013
- Acoustic Noise/Vibration Reduction of a Single-Phase SRM Using Skewed Stator and RotorIEEE Transactions on Industrial Electronics, 2012
- Effect of Pole and Slot Combination on Noise and Vibration in Permanent Magnet Synchronous MotorIEEE Transactions on Magnetics, 2011
- Design Aspects of High-Speed High-Power-Density Laminated-Rotor Induction MachinesIEEE Transactions on Industrial Electronics, 2010
- Core Losses and Torque Ripple in IPM Machines: Dedicated Modeling and Design TradeoffIEEE Transactions on Industry Applications, 2010
- Very-High-Speed Slotless Permanent-Magnet Motors: Analytical Modeling, Optimization, Design, and Torque Measurement MethodsIEEE Transactions on Industrial Electronics, 2009
- Minimizing skin effect in random wound high speed machine stator2009
- Design and Evaluation of a 60 000 rpm Permanent Magnet Bearingless High Speed Motor2007
- Mechanical Design Considerations for Conventionally Laminated, High-Speed, Interior PM Synchronous Machine RotorsIEEE Transactions on Industry Applications, 2004