Preliminary design overview and performance assessment of the ITER low-field side reflectometer
- 10 March 2020
- journal article
- research article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 60 (6) , 066005
Abstract
The design of the ITER low-field side reflectometer (LFSR) has matured to a complete end-to-end preliminary design. LFSR will supply three important plasma measurements: 1) electron density profile, 2) electron density fluctuations, and 3) poloidal rotation. Simultaneous measurements of the three quantities are enabled by an array of six monostatic antennas which inject from an equatorial port on the outboard side of the ITER vessel. Low-loss transmission lines, consisting of corrugated, overmoded waveguide and miter bends, transmit the 30 – 165 GHz, O- and X-mode signals to and from the ITER plasma. Integrated transmission-line components serve a range of purposes, such as protection from high-power stray radiofrequency radiation, accommodation of transmission-line displacement, and simultaneous measurement of reference and plasma phases during the discharge. Broadband transmission signals are realized by full-band microwave transceivers combined with quasi-optical multiplexing. A field-programmable gate array (FPGA) processor demodulates the profile reflectometer signals, enabling real-time density profile measurements for Plasma Control System feedback. A full-scale transmission line test facility provides an integrated environment to assess the performance of critical LFSR components. Theoretical modeling together with insertion loss measurements provide the basis for a comprehensive power budget, which accounts for transmitted output power, transmission-line losses, antenna coupling, and plasma effects. Results indicate that high signal-to-noise ratios are achievable with the current design. A synthetic reflectometer model, using real design parameters and baseline ITER profiles, has been developed to estimate the return signal. With evolving microwave and data acquisition technologies, full-band, ultrafast sweeps (< 1 μs) will be realizable for ITER.Keywords
Funding Information
- United States Department of Energy (DE-AC02-09CH11466)
This publication has 31 references indexed in Scilit:
- Multiband reflectometry system for density profile measurement with high temporal resolution on JET tokamakReview of Scientific Instruments, 2010
- New reflectometer design for density profile measurements on JETReview of Scientific Instruments, 2006
- A dual source D-band reflectometer for density profile and fluctuations measurements in Tore-SupraNuclear Fusion, 2006
- High-resolution dual-polarization frequency modulated reflectometer density profile measurements on DIII-DReview of Scientific Instruments, 2004
- Phase retrieval of gyrotron beams based on irradiance momentsIEEE Transactions on Microwave Theory and Techniques, 2002
- Two-dimensional simulations of correlation reflectometry in fusion plasmasPlasma Physics and Controlled Fusion, 2002
- Ultrafast frequency sweep heterodyne reflectometer on the Tore Supra tokamakReview of Scientific Instruments, 2000
- Ultrafast broadband frequency modulation of a continuous wave reflectometry system to measure density profiles on ASDEX UpgradeReview of Scientific Instruments, 1996
- HE11mitre bends and gaps in a circular corrugated waveguideInternational Journal of Electronics, 1994
- Comments on ‘‘Relativistic effects on microwave reflectometry’’ [Phys. Fluids B 4, 3460 (1992)]Physics of Fluids B: Plasma Physics, 1993