Production and Characterization of Alumina and Steatite Based Ceramic Insulators
- 3 July 2019
- journal article
- research article
- Published by Taylor & Francis in Transactions of the Indian Ceramic Society
- Vol. 78 (3) , 161-164
Abstract
In this study, production of alumina and steatite containing ceramic insulators as thermostat material was realized by investigating the composition, pressing pressure and sintering temperature. 90 bar of pressing pressure was employed to give a ring shape to thermostat insulators by mixing with 3% kerosene. Alumina based samples were sintered at 1400oC, while 1300oC sintering temperature was determined to be efficient for steatite based samples. Optimum pressing pressure and sintering temperature for batches were 90 bar and 1350oC, respectively. Sintered bodies subjected to Megger test at 1200 V and 50 Hz exhibited good electrical insulation. It was concluded that higher alumina containing batch composition was the ultimate candidate as thermostat insulator, especially in terms of density and compressive strength.Keywords
This publication has 18 references indexed in Scilit:
- Effect of ZrO2 on the sintering behavior, strength and high-frequency dielectric properties of electrical ceramic porcelain insulatorMaterials Research Express, 2018
- Nanotechnology applications for electrical transformers—A reviewElectric Power Systems Research, 2017
- Effects of Sintering Temperature on Properties of Green Porous Mullite Ceramics Fabricated by Insulators WasteTransactions of the Indian Ceramic Society, 2016
- Evaluation of the electrical porcelain properties of alumina-silicate nano-clayJournal of the Chinese Advanced Materials Society, 2015
- Fabrication and microstructure investigation of ultra-high-strength porcelain insulatorJournal of the European Ceramic Society, 2012
- Characterization of microstructural and thermal properties of steatite/cordierite ceramics prepared by using natural raw materialsJournal of the European Ceramic Society, 2011
- Thermal and mechanical properties of cordierite, mullite and steatite produced by plasma sprayingCeramics International, 2004
- X-ray powder diffraction phase analysis and thermomechanical properties of silica and alumina porcelainsJournal of the European Ceramic Society, 2004
- Stability of electrically conducting polymers2001
- Evaluation and Utilization of Rajpardi Clay in the Production of Traditional Ceramics: Part—III: Development of Pressed Low Tension Insulators through Optimal Utilization of Rajpardi ClaysTransactions of the Indian Ceramic Society, 1998