A Pb-alloy film preparation technique for Josephson junctions
Authors:
- 1 April 1985
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 57 (7) , 2597-2600
Abstract
A Pb-alloy film preparation technique is proposed and applied to high-reliability Josephson junctions with small threshold current spreads. Fine-grained films with the average grain sizes as small as 30 nm are obtained. This is accomplished by condensing Pb, In, and Au molecular beams onto liquid-nitrogen-cooled substrates. Fine grains result from AuIn2 particles being dispersed finely and uniformly in alloy films. Josephson junctions are fabricated using these fine-grained films as base electrodes. The threshold current standard deviation is reduced to 2.4%. This is due to the fine grain size and surface passivation treatment for the base electrodes. The cumulative failure is found to be less than 0.13% after 8400 thermal cycles between 4.2 K and room temperature. This is the best value reported thus far. This technique achieves fine-grained metal alloy films providing new properties. These properties promise to aid development of high-performance Josephson IC’s.Keywords
This publication has 8 references indexed in Scilit:
- Thermal stability of Pb-alloy Josephson junction electrode materials. IX. Multilayered Pb–In–Au electrodesJournal of Applied Physics, 1983
- Thin film fabrication for the Josephson technology cross-sectional modelJournal of Vacuum Science & Technology B, 1983
- Oxygen-doped Pb-In-Au films suitable for Josephson tunnel junction base electrodesJournal of Applied Physics, 1982
- Thermal stability of Pb-alloy Josephson junction electrode materials. I. Effects of film thickness and grain size of Pb-In-Au base electrodesJournal of Applied Physics, 1981
- High-reliability Pb-alloy Josephson junctions for integrated circuitsIEEE Transactions on Electron Devices, 1980
- Aging phenomena of plasma oxidized Pb-alloy Josephson junctionsJournal of Applied Physics, 1980
- Single-Step Optical Lift-Off ProcessIBM Journal of Research and Development, 1980
- Automatic 300–4 K temperature cycling apparatusReview of Scientific Instruments, 1978