Abstract
Calcite and dolomite are the two most common minerals in carbonate-bearing faults and shear zones. Motivated by field examples from exhumed seismogenic faults in the Italian Central Apennines, we investigated the frictional and microstructural evolution of gouge mixtures consisting of 50 wt % calcite and 50 wt % dolomite using a rotary-shear apparatus. The gouges were sheared at a range of slip rates (30 µm s−1–1 m s−1), displacements (0.05–0.4 m), and normal loads (17.5–26 MPa), under both room humidity and water-dampened conditions. The frictional behaviour and microstructural evolution of the gouges were strongly influenced by the presence of water. At room humidity, slip strengthening behaviour was observed up to slip rates of 0.01 m s−1, which was associated with gouge dilation and the development of a 500–900 µm wide slip zone cut by Y-, R-, and R1-shear bands. Above a slip rate of 0.1 m s−1, dynamic weakening accompanied the development of a localised 0.1 m s−1) and room humidity, supporting the notion that some foliated gouges and cataclasites may form during seismic slip in natural carbonate-bearing faults.
All Related Versions
Funding Information
  • FP7 Ideas: European Research Council (614705)
  • Marsden Fund (UOO1417, UOO1829)

This publication has 61 references indexed in Scilit: