Dynamic Modeling and Stability Prediction of Robot Milling Considering the Influence of Force-Induced Deformation on Regenerative Effect and Process Damping
Open Access
Abstract
Undesirable chatter is one of the key problems that restrict the improvement of robot milling quality and efficiency. The prediction of chatter stability, which is used to guide the selection of process parameters, is an effective method to avoid chatter in robot milling. Due to the weak stiffness of the robot, deformation caused by milling forces becomes an unavoidable problem, which will change the tool–workpiece contact area and affect the stability prediction. However, it is often simplified and neglected. In this paper, a multipoint contact dynamic model of robot milling is established, which considers the influence of force-induced deformation on the regenerative effect and process damping. The tool–workpiece contact area is discretized into a finite number of nodes along the axial direction so that the force and deformation at each node can be calculated separately. The different contact forms of the tool–workpiece under different process parameters are discussed in different cases, and the interaction process between cutting force and force-induced deformation is analyzed in detail. An iterative strategy is used to calculate the deformation of each node and the result of the tool–workpiece contact boundary. Finally, chatter stability of robot milling is predicted by a fully discrete method. Robot milling experiments were carried out to verify the predicted results. The results show that force-induced deformation is an important factor improving the stability prediction accuracy of robot milling, and a more accurate prediction result can be obtained by simultaneously considering force-induced deformation and process damping.Keywords
Funding Information
- Civil Aircraft Project (MJZ4-1N22, 51975053, D44F9A65, 2B0188E1, 2022YFHH0121, 2021CX01023)
- National Natural Science Foundation of China (MJZ4-1N22, 51975053, D44F9A65, 2B0188E1, 2022YFHH0121, 2021CX01023)
- Inversion and Application Project of Outcome (MJZ4-1N22, 51975053, D44F9A65, 2B0188E1, 2022YFHH0121, 2021CX01023)
- Key R&D Program of Inner Mongolia (MJZ4-1N22, 51975053, D44F9A65, 2B0188E1, 2022YFHH0121, 2021CX01023)
- Basic Research Fund of Beijing Institute of Technology (MJZ4-1N22, 51975053, D44F9A65, 2B0188E1, 2022YFHH0121, 2021CX01023)
This publication has 39 references indexed in Scilit:
- Stability lobes in milling including process damping and utilizing Multi-Frequency and Semi-Discretization MethodsInternational Journal of Machine Tools and Manufacture, 2012
- Chatter in machining processes: A reviewInternational Journal of Machine Tools and Manufacture, 2011
- Full-discretization and semi-discretization for milling stability prediction: Some commentsInternational Journal of Machine Tools and Manufacture, 2010
- A full-discretization method for prediction of milling stabilityInternational Journal of Machine Tools and Manufacture, 2010
- Strategies for error prediction and error control in peripheral milling of thin-walled workpieceInternational Journal of Machine Tools and Manufacture, 2008
- Updated semi‐discretization method for periodic delay‐differential equations with discrete delayInternational Journal for Numerical Methods in Engineering, 2004
- Prediction of regenerative chatter by modelling and analysis of high-speed millingInternational Journal of Machine Tools and Manufacture, 2003
- Analytical Prediction of Stability Lobes in MillingCIRP Annals, 1995
- Peripheral milling conditions for improved dimensional accuracyInternational Journal of Machine Tools and Manufacture, 1994
- The Mathematics of Coordinated Control of Prosthetic Arms and ManipulatorsJournal of Dynamic Systems, Measurement, and Control, 1972