Effects of fuel properties on combustion and emissions of a direct injection diesel engine fueled with n-butanol-diesel blends
Authors:
- 1 January 2017
- journal article
- conference paper
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 9 (1) , 013105
Abstract
In this paper, the influence of the addition of n-butanol on fuel properties, combustion, and emission characteristics for a diesel engine was studied. Kinematic viscosity, lower heating value, closed-cup flash point, density, cetane number, and distillation were measured. The engine performance and emissions were also tested at nine loads of 1200 rpm. On this basis, numerical models of the diesel at 100% load for five fuels were established based on Computational Fluid Dynamics (CFD). Next, CFD was used to evaluate the interactive influences among fuel properties and emissions quantitatively. The results demonstrated that kinematic viscosity, lower heating value, closed-cup flash point, density, and cetane number presented downward trends of varying degree with the increase in n-butanol content. Also, 10 vol. %, 50 vol. %, 90 vol. %, and 95 vol. % distillation temperatures decreased, and the range of decline decreased gradually. Hydrocarbon (HC), carbon monoxide (CO), and particulate matter emissions decreased, while nitrogen oxides (NOx) emissions and fuel consumption increased. In the combustion process, the regions of concentration for the formation of HC and CO were the gap and near the wall, and the production of HC emissions lagged behind that of CO emissions.Keywords
Funding Information
- the Natioonal Science and Technology Support Program (2014BAD02B05)
- National Natural Science Foundation of China (51506049)
This publication has 37 references indexed in Scilit:
- Studies on the influence of combustion bowl modification for the operation of Cymbopogon flexuosus biofuel based diesel blends in a DI diesel engineApplied Thermal Engineering, 2017
- An assessment on performance, combustion and emission behavior of a diesel engine powered by ceria nanoparticle blended emulsified biofuelEnergy Conversion and Management, 2016
- Influence of diesel fuel blended with biodiesel produced from waste cooking oil on diesel engine performanceFuel, 2016
- Aluminum oxide and copper oxide nanodiesel fuel properties and usage in a compression ignition engineFuel, 2016
- Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl etherEnergy, 2014
- Synthesis of recyclable hollow Fe/C—SO3H fiber as a catalyst for the production of biodieselEnvironmental Progress & Sustainable Energy, 2013
- Performance of a Diesel Engine with Ethyl Levulinate-Diesel Blends: A Study using Grey Relational AnalysisBioResources, 2013
- Characterisation of waste derived intermediate pyrolysis oils for use as diesel engine fuelsFuel, 2013
- Experimental and modeling study of the effects of adding oxygenated fuels to premixed n-heptane flamesCombustion and Flame, 2012
- Review of the effects of biodiesel on NOx emissionsFuel Processing Technology, 2012