Monitoring Liquid Level of Blast Furnace Hearth and Torpedo Ladle by Electromotive Force Signal
Open Access
Abstract
The state of a blast furnace hearth, especially the liquid level of hot metal and slag during the tapping process, is of crucial importance with respect to a long campaign blast furnace. In practice, the state of the hearth is evaluated mainly by the experience of operators. In this paper, the electromotive force (EMF) is used to monitor the liquid level of a laboratory scale of blast furnace hearth and the effect of liquid level, EMF sensors position and the thickness of refractory on EMF signals are tested using a single layer of water and double layers of water and oil. After laboratory experiments, the electromotive force (EMF) is used to monitor the liquid level of torpedo ladle successfully. Laboratory experimental results show that the change in liquid level can be characterized by EMF signal. The state of liquid surface and local thermal state cause the EMF signal to vary in the circumferential direction of the vessel. Furthermore, the EMF signal magnitude decreases with the decrease of the thickness of the graphite crucible. Finally, the main conclusions of the laboratory experiment are supported by the torpedo ladle experiment.Keywords
Funding Information
- the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning (No.TP2015039)
This publication has 15 references indexed in Scilit:
- Multistep Forecasting Models of the Liquid Level in a Blast Furnace HearthIEEE Transactions on Automation Science and Engineering, 2016
- Real-time blast furnace hearth liquid level monitoring systemIronmaking & Steelmaking: Processes, Products and Applications, 2016
- Development of Pig Iron and Molten Slag Level Measurement Technique for Blast FurnaceISIJ International, 2014
- Monitoring and control of hearth refractory wear to improve blast furnace operationIronmaking & Steelmaking: Processes, Products and Applications, 2013
- New Techniques to Detect the Suitable Time to Close the Tap Hole of a Blast FurnaceSteel Research International, 2012
- Model of Blast Furnace Hearth DrainageSteel Research International, 2011
- New technique for abnormal casting identification in a blast furnaceRevue de Métallurgie, 2007
- Simple simulation model of blast furnace hearthIronmaking & Steelmaking: Processes, Products and Applications, 2005
- Novel model for estimation of liquid levels in the blast furnace hearthChemical Engineering Science, 2004
- Indicators of the Internal State of the Blast Furnace Hearth.ISIJ International, 2002