Contour Method with Uncertainty Quantification: A Robust and Optimised Framework via Gaussian Process Regression
Open Access
- 16 April 2022
- journal article
- research article
- Published by Springer Nature in Experimental Mechanics
- Vol. 62 (8) , 1305-1317
Abstract
Background: Over the past 20 years, the Contour Method (CM) has been extensively implemented to evaluate residual stress at the macro scale, especially in products where material processing is involved. Despite this, insufficient attention has been devoted to addressing the problems of input data filtering and residual stress uncertainties quantification. Objective: The present research aims to tackle this fundamental issue by combining Gaussian Process Regression (GPR) with the CM. Thanks to its stochastic nature, GPR associates a Gaussian distribution with every subset of data, thus holding the potential to model the inherent uncertainty of the input data set and to link it to the measurements and the surface roughness. Methods: The conventional and unrobust spline smoothing process is effectively replaced by the GPR which is capable of providing uncertainties over the fitting. Indeed, the GPR stochastically and automatically identifies the fitting parameter, thus making the experimental data post-processing practically unaffected by the user’s experience. Moreover, the final residual stress uncertainty is efficiently evaluated through an optimised Monte Carlo Finite Element simulation, by appropriately perturbing the input dataset according to the GPR predictions. Results: The simulation is globally optimised exploiting numerical techniques, such as LU-factorisation, and developing an on-line convergence criterion. In order to show the capability of the presented approach, a Friction Stir Welded plate is considered as a case study. For this problem, it was shown how residual stress and its uncertainty can be accurately evaluated in approximately 15 minutes using a low-budget personal computer. Conclusions: The method developed herein overcomes the key limitation of the standard spline smoothing approach and this provides a robust and optimised computational framework for routinely evaluating the residual stress and its associated uncertainty. The implications are very significant as the evaluation accuracy of the CM is now taken to a higher level.Keywords
This publication has 35 references indexed in Scilit:
- Assessment of residual stress of welded structural steel plates with or without post weld rolling using the contour method and neutron diffractionJournal of Materials Processing Technology, 2013
- Longitudinal Residual Stress Analysis in AA2024-T3 Friction Stir WeldingThe Open Mechanical Engineering Journal, 2013
- Mapping Multiple Components of the Residual Stress Tensor in a Large P91 Steel Pipe Girth Weld Using a Single Contour CutExperimental Mechanics, 2012
- Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilitiesInternational Journal for Numerical Methods in Engineering, 2009
- Characterization of laser peening residual stresses in Al 7075 by synchrotron diffraction and the contour methodJournal of Neutron Research, 2007
- Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weldActa Materialia, 2006
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Laser surface-contouring and spline data-smoothing for residual stress measurementExperimental Mechanics, 2004
- Validation of the Contour Method of Residual Stress Measurement in a MIG 2024 Weld by Neutron and Synchrotron X-ray DiffractionJournal of Neutron Research, 2003
- Cross-Sectional Mapping of Residual Stresses by Measuring the Surface Contour After a CutJournal of Engineering Materials and Technology, 2000