Dynamic Response of a Sheet Pile of Fiber-Reinforced Polymer for Waterfront Barriers
- 1 December 2011
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 15 (6) , 974-984
Abstract
This paper presents the results from a combined experimental and advanced computational study to understand the dynamic response of a pultruded fiber-reinforced polymer (FRP) sheet pile of 9 m length that is installed into the ground near Venice, Italy. The peak embedment force of 10 kN is applied at the top as a sinusoidal compression force having a maximum frequency of circa 760 Hz. Physical measurements from accelerometers are reported for the lateral deformation response of a single sheet pile and of a unit restrained by an installed waterfront barrier. A finite-element modeling methodology for the two test configurations is developed by using the Strand7 code, so that advanced computational results can be compared against the field application measurements. Closed-form equations for the fundamental frequency are developed, with one accounting for the presence of rotary inertia and shear deformation. Dynamic responses at different embedment lengths (1–7 m) are examined, and a very good correlation is found between theory and practice. Numerically, the performance of the FRP sheet pile is compared with the response of a fictitious sheet pile of steel and with two new FRP geometries that increase stiffness to minimize flexure about the minor axis of bending. By increasing the mass by 10%, the maximum lateral displacement can be the same as the steel unit and of the tested FRP unit. Findings of the research demonstrate that the FRP unit can be installed by using the same pile driving rig and procedure for steel sheet piling.
Keywords
This publication has 11 references indexed in Scilit:
- Free Vibrations of Pultruded FRP Elements: Mechanical Characterization, Analysis, and ApplicationsJournal of Composites for Construction, 2009
- Characterization of a Pultruded FRP Sheet Pile for Waterfront Retaining StructuresJournal of Materials in Civil Engineering, 2006
- Composites for Construction2006
- Evaluation of Vibration Damping of Glass-Reinforced-Polymer-Reinforced Glulam Composite BeamsJournal of Structural Engineering, 2005
- Determination of critical load for flange buckling in concentrically loaded pultruded columnsComposites Part B: Engineering, 2004
- Flexural and Shear Rigidity of Composite Sheet PilesJournal of Composites for Construction, 2003
- Durability of Fiberglass Composite Sheet Piles in WaterJournal of Composites for Construction, 2002
- Experimental and Finite Element Analysis of Pultruded Glass-Graphite/Epoxy Hybrids in Axial and Flexural Modes of VibrationJournal of Composite Materials, 1996
- Finite Element Model Identification Using Modal DataJournal of Sound and Vibration, 1994
- LXVI. On the correction for shear of the differential equation for transverse vibrations of prismatic barsJournal of Computers in Education, 1921