Abstract
By manipulating the geometry of the microfluidic channels and their surface chemistry, capillary-driven microfluidics can move and stop fluids spontaneously without the need for external instrumentation. Furthermore, complex microfluidic circuits can be pre-programmed by synchronizing the capillary pressures and encoding the surface tension of the microfluidic chips. One of the key components of these systems is the capillary valve. However, the main concern for these valves is the presence of unwanted diffusion during the valve loading and activation steps that can cause cross-contamination. In this study, we designed and validated a novel diffusion-free capillary valve, the π-valve. This valve consists of a 3D structure and a void area. The void acts as a spacer between two fluids to avoid direct contact. When the valve is triggered, the air trapped within the void is displaced by a pneumatic suction induced from the capillary flow of the downstream. The proposed design eliminates any diffusion between fluids. Numerical simulation was used to design and improve the architecture of the π-valve, and 3D printing was used to fabricate either the mold or the microfluidic chip. The comparison with a conventional valve (based on a constriction-expansion valve) demonstrated that the π-valve eliminated possible backflow into the valve and reduced the mixing and diffusion during the loading and trigger steps. It was multiplexed successfully, achieving the sequential release of 3 solutions in a 3D printed microfluidic chip without the need for any external instrumentation. Overall, the π-valve prevents cross-contamination, minimizes sample use, and facilitates a sophisticated pre-programmed release of fluids, offering a promising tool for carrying out automated immunoassays at the point-of-care testing.