Laser-assisted dry, wet texturing and phase transformation of flexible polyethylene terephthalate substrate revealed by Raman and ultraviolet-visible spectroscopic studies
- 1 May 2018
- journal article
- research article
- Published by Laser Institute of America in Journal of Laser Applications
- Vol. 30 (2) , 022008
Abstract
A systematic understanding of laser-induced texturing and its influence on the local structural change in polyethylene terephthalate (PET) substrate offers enhanced performance characteristics of photovoltaic devices. The formation of multiple phases in flexible PET substrate using selective processing by means of laser-assisted heat input reveals enhanced ultraviolet-visible (UV-Vis) absorption. The authors investigate the characteristics of multiple phases formed during the interaction of the laser pulse on the PET substrate processed under dry and wet environments. It is observed that the laser beam profile is replicated on the substrate during wet environment. Moreover, the heat gradient of laser beam have induced various indexed crystalline phases as revealed by Raman spectroscopy as well as their optical characteristics of replicated profile on PET substrate is quantified using UV-Vis absorption spectroscopy. Furthermore, a redshift in the absorption measured at the center of the projected beam profile is attributed to the higher degree of ordered crystalline phase as compared to other graded phases inside the trench. These findings of phase gradients and their influence on optical properties of laser-induced texturing would be useful for laser-based rapid texturing for flexible photovoltaics.Keywords
This publication has 43 references indexed in Scilit:
- Investigations on effect of laser-induced self-assembled patterning on optical properties of flexible polyimide substrates for solar cell applicationsJournal of Physics D: Applied Physics, 2018
- Laser assisted wet texturing of flexible polyethylene terephthalate substrate using Nd 3+ :YAG laser for photovoltaics devicesMaterials Science and Engineering: B, 2017
- Extending ultra-short pulse laser texturing over large areaApplied Surface Science, 2016
- Direct Laser Writing of Porous-Carbon/Silver Nanocomposite for Flexible ElectronicsACS Applied Materials & Interfaces, 2016
- High-performance flexible energy storage and harvesting system for wearable electronicsScientific Reports, 2016
- Highly Stretchable and Sensitive Unidirectional Strain Sensor via Laser CarbonizationACS Applied Materials & Interfaces, 2015
- Inverted Nanocone-Based Thin Film Photovoltaics with Omnidirectionally Enhanced PerformanceACS Nano, 2014
- Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer filmsNature Materials, 2011
- Direct Writing of Polymer Lasers Using Interference AblationAdvanced Materials, 2011
- State of the Art in Laser Surface TexturingJournal of Tribology, 2005